Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Hummel › A › A 65/30

Hummel A 65/30

Built: 1967 to approx. 1900s · Series: A

More machines from model year 1967

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

In the 1967 to approx. 1900s, Hummel built the Hummel A 65/30 as a tractor from the A series. The two-cylinder engine, displacing 1.5 litres, produces 31 hp.

Unladen, it tips the scales at 1,430 kg.

Within the range, rated power spans from 20 to 31 hp; with 31 hp, the A 65/30 sits at the top. Below it ranks the A 65/20 with 20 hp.

Hummel A 65/20: air-cooled two-cylinder diesel engine with 1,005 cc displacement and 20 hp as a lightweight small tractor for agricultural and municipal use in the 1960s

The A 65/20 belongs to the small two-cylinder diesel tractors built during the 1960s for smaller farms and municipal use. Air-cooled two-cylinder engines of this class were a rugged, low-maintenance alternative to larger water-cooled tractors.

Read on 3 more paragraphs

The air-cooled two-cylinder diesel engine has a displacement of 1,005 cc and produces 20 hp. At an unladen weight of 1,050 kilograms, this is a light, compact tractor whose power was sufficient for smaller plots, trailer work and driving mounted implements through the power take-off.

Tractors of this class fall under driving licence category T; the power take-off on such machines runs at the standard speed of 540 or 1,000 rpm, so that mounted implements fit regardless of manufacturer. The air-cooled engine needs no radiator, water pump or antifreeze, making it robust against frost and simple to maintain.

When buying such an old two-cylinder machine, it is worth checking the cooling fins on the cylinder and head, which should be free of oily, caked deposits, as well as compression and smoke behaviour on a cold start. Bearings on the front axle and steering, the condition of the clutch and the tightness of the injection pump also belong in the inspection. The steering box and front axle bushings deserve a look too, since a machine this old and this rare can be hard to source replacement parts for.

Sources: SpecCodex-Register: Kennwerte des Modells A 65/20

Technical data

Engine

Power31 hpcorrect
Power31 hpcorrect
Cylinders2correct
Displacement1,488 cm³correct

Dimensions and weights

Unladen weight1,430 kgcorrect

Where this model stands

Power-to-weight ratio: 15.9 kW/t (23 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 18% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hummel A 65/30 have?

The Hummel A 65/30 delivers 31 hp.

How much does the Hummel A 65/30 weigh?

The unladen weight is 1,430 kg.

What engine does the Hummel A 65/30 have?

2 cylinders, 1,488 cm³ displacement.

When was the Hummel A 65/30 built?

Production years: 1967–19??.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare