Htd Trailers 32 2
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
HTD Trailers – other models: the collective page of heavy-duty trailers outside the named ranges, from HTD 20.2 TR to HTD 32 2, unladen weight 3.56 to 9.37 t, gross weight 29 to 38 t, length up to 13.85 m
This page gathers the HTD Trailers the register could not assign to a named range. The type designations HTD 20.2 TR, HTD 30.3.TR and HTD 32 2 denote multi-axle trailers from the heavy-haulage segment with gross weights of up to 38 t and lengths of up to nearly 14 m, typical of low-loaders and semi-trailers used in special transport.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 3,560 to 9,370 kg, gross weights from 29,000 to 38,000 kg, lengths from 7,670 to 13,850 mm and widths from 2,400 to 2,600 mm.
Trailers of this size are used in heavy haulage, for example to carry construction machinery, plant components or other indivisible loads, where the high axle count provides the necessary load capacity. Journeys at these dimensions generally require a special permit, and the towing vehicle must be rated for the corresponding combined gross weight. Such trailers are usually registered with specialist heavy-haulage hauliers.
When buying used, what counts on HTD trailers of this class is above all the condition of axles, wheel hubs and the braking system, the load rating of the tyres, and corrosion on the chassis rails and coupling points. The registration documents should clearly state the permitted gross weight and the axle load per axle; spare parts for axles and brakes usually run through specialist commercial-vehicle workshops.
Sources: SpecCodex register, model data: HTD Trailers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,500 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 8,350 mmcorrect |
| Unladen weight | 9,320 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Htd Trailers HTD 32 2 weigh?
The unladen weight is 9,320 kg.
What is the gross vehicle weight of the Htd Trailers HTD 32 2?
32,000 kg.
Up to what speed is the Htd Trailers HTD 32 2 approved?
Approved up to 100 km/h.
What are the dimensions of the Htd Trailers HTD 32 2?
12,500 mm × 2,600 mm.
When was the Htd Trailers HTD 32 2 built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.