Holder C-Trac C2.42
Built: 2008-2009 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Holder tractors – other models: collective page of the implement-carrier and articulated-tractor manufacturer from Metzingen and Schwäbisch Gmünd, one- to four-cylinder engines, 9 to 80 kW, 785 to 2,885 kg unladen weight
This page gathers the Holder tractors the register could not assign to a named range. Holder was founded in Metzingen and later moved production to Schwäbisch Gmünd; the company is known above all for implement carriers and articulated tractors used with mounted mowing, sweeping and clearing equipment in municipal grounds maintenance, in vineyards and orchards, and in grassland management. The model range spans from early single-axle and small A-type machines to the larger C series with stronger engines.
Read on 3 more paragraphs
The register lists here 90 versions with 9 to 80 kW from one- to four-cylinder engines with 604 to 3,619 cm³ displacement. Unladen weights range from 785 to 2,885 kg, gross vehicle weights from 1,250 to 5,500 kg, lengths from 2,440 to 4,235 mm, widths from 1,130 to 1,645 mm and heights from 1,330 to 2,060 mm.
With its implement carriers, Holder occupies a niche between the small tractor and the municipal vehicle, where manoeuvrability from articulated steering and the range of mounted implements matter more than raw pulling power. The machines are found mainly in German-speaking countries and in Europe's wine-growing regions, where slope capability and narrow track widths are in demand.
On used examples, the articulated models call for checking the condition of the articulation joint and the hydraulic connections for mounted implements, while all models need checking of engine, clutch and brakes, and rust on the chassis and mounting plate; the wide range of implements makes compatibility a check point of its own. Spare parts run through Holder distribution and specialist municipal and viticulture equipment dealers.
Sources: SpecCodex register, model data: Holder (weitere Modelle)
Technical data
Engine
| Power | 31.3 kWcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 1,498 cm³correct |
Dimensions and weights
| Length | 3,350 mmcorrect |
|---|---|
| Width | 1,493 mmcorrect |
| Unladen weight | 1,070 kgcorrect |
| Gross vehicle weight | 2,400 kgcorrect |
Where this model stands
Power-to-weight ratio: 29.3 kW/t (31 kW / 1.1 t)
Power class: Universal (40–100 hp)
Stronger than 28% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Holder C-Trac C2.42 have?
The Holder C-Trac C2.42 delivers 31.3 kW.
How much does the Holder C-Trac C2.42 weigh?
The unladen weight is 1,070 kg.
What is the gross vehicle weight of the Holder C-Trac C2.42?
2,400 kg.
What engine does the Holder C-Trac C2.42 have?
4 cylinders, 1,498 cm³ displacement.
What are the dimensions of the Holder C-Trac C2.42?
3,350 mm × 1,493 mm.
When was the Holder C-Trac C2.42 built?
Production years: 2008-2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.