Hobur 0-3-ST
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hobur – other models: the collective page of trailers outside the named ranges, from small trailers to heavy semi-trailers, 881 kg to 15.7 t unladen weight, 1.16 to 45 t gross weight
This page gathers the Hobur trailers the register could not assign to a named range. The model list is shaped by type codes such as O-1-24, O-3-39, O-3-40, O-3-41, O-3-43, O-3-45 and O-4-45 as well as the BPO, BPU and HTS codes, spanning small single-axle units to large multi-axle versions.
Read on 3 more paragraphs
The register lists 30 versions here with unladen weights from 881 to 15,700 kg and gross vehicle weights from 1,155 to 45,000 kg. Lengths run from 8,660 to 13,920 mm, widths from 2,200 to 2,550 mm.
With this span from light trailer to heavy semi-trailer, Hobur covers several market segments in commercial vehicle transport and so competes with other European builders of tandem and tridem semi-trailers; the numerous O-type variants show how finely the model range is staggered within individual axle and weight classes.
When buying used, this wide range calls for different checkpoints: on the light trailers the floor plates, side panels and lighting, on the heavy semi-trailers the frame, axle assemblies, brake system and overrun coupling, plus corrosion on load-bearing parts. Spare parts come through the manufacturer and workshops specialising in commercial vehicle trailers; on the O-type versions with more axles the axle stub joints are also worth checking for play, along with the springs and spring hangers.
Sources: SpecCodex register, model data: Hobur (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,870 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,790 mmcorrect |
| Unladen weight | 8,776 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Hobur 0-3-ST weigh?
The unladen weight is 8,776 kg.
What is the gross vehicle weight of the Hobur 0-3-ST?
39,000 kg.
Up to what speed is the Hobur 0-3-ST approved?
Approved up to 100 km/h.
What are the dimensions of the Hobur 0-3-ST?
11,870 mm × 2,550 mm.
When was the Hobur 0-3-ST built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
0-3-39 T
0-3-39T
0-3-43 T
0-3-45 T
0-3-45T
0-4-45 T
10 F
B80 10-247
BPO15-30
BPO15-30 RGZXXX
BPU 12-242
HTA0000
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.