Start › Excavators & compaction › Hitachi › ZX200LC-3

Hitachi ZX200LC-3

Series: Hitachi Hydraulic Excavator

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hitachi ZX200LC-3 is a model in the Hitachi Hydraulic Excavator series. The engine delivers 122.3 kW, with a displacement of 5,193.1 cm³. Torque is 655.1 Nm. Rated speed is 2,000 rpm. The unladen weight is 20,400 kg. Ground clearance is 451.1 mm. The tank holds 400.1 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 424.3 l/min. The hydraulic tank holds 240.4 litres. Working pressure is 343 bar. The cooling system holds 26.1 litres. The oil fill is 23.1 litres. The engine fitted is the AI-4HK1X. The Hitachi Hydraulic Excavator series covers 158 models. Rated output within it ranges from 42.4 to 481.7 kW; the ZX200LC-3 sits in the lower part of that range with 122.3 kW. Its immediate neighbours are the ZX210LC-6 below it with 119.3 kW and the ZX230 above it with 124.5 kW. 347 Hitachi models across 20 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelAI-4HK1Xcorrect
Power122.3 kWcorrect
Rated speed2,000 rpmcorrect
Torque655.1correct
Speed at max. torque1,500 rpmcorrect
Displacement5,193.1 cm³correct
AspirationTurbocharged, intercoolercorrect
Coolant capacity26.1 lcorrect
Engine oil capacity23.1 lcorrect

Dimensions and weights

Ground clearance451.1correct
Unladen weight20,400 kgcorrect

Working data

Pump flow424.3 l/mincorrect
Hydraulic oil capacity240.4 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity400.1 lcorrect

Other data

Height2,950.5correct

Where this model stands

Power-to-weight ratio: 6 kW/t (122 kW / 20.4 t)

Stronger than 58% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hitachi ZX200LC-3 have?

The Hitachi ZX200LC-3 delivers 122 kW.

How much does the Hitachi ZX200LC-3 weigh?

The unladen weight is 20,400 kg.

What engine does the Hitachi ZX200LC-3 have?

5,193 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

160 LC

180 LCN

EX 165

EX100-5

EX100M-5

EX1100

EX120-5

EX1200-5C

EX130H-5

EX150LC-5

EX200-5

EX200LC-5

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare