Heuser 2 ACHS ANHANGER
Built: 2018 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Heuser – other models: trailers outside the named series, twin-axle and heavy-haulage trailers, 3,670 to 6,700 kg kerb weight, 18,000 to 38,000 kg gross vehicle weight, class O4
This page collects Heuser units that the register could not assign to a named series. The 2 ACHS ANHANGER designation directly states the axle count of that version; all models fall into class O4 (gross vehicle weight above 10 t), the range of heavy construction and haulage trailers built to run behind a truck rather than a car, with the 3A-SHK and OHNE designations marking further special variants in the same weight class.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 3,670 to 6,700 kg and gross vehicle weights from 18,000 to 38,000 kg. Lengths range from 4,850 to 11,270 mm, widths from 2,520 to 2,550 mm – a span running from compact tandem-axle trailers to long low-loaders.
Trailers in this weight class carry construction machinery, bulk goods or containers behind class N2 or N3 trucks and are common at construction, demolition and earthworks firms, where short turnaround times on site and solid payload matter most.
When buying used, check the condition of axles, brake system and suspension, rust on the chassis and ramps, the function of the coupling, plus wear on tyres and brake linings; on the long versions also check the torsional stiffness of the frame, the tightness of the hydraulic lines and the condition of the wheel chocks and the drawbar's support winder.
Sources: SpecCodex register, model data: Heuser (weitere Modelle)
Technical data
Dimensions and weights
| Length | 4,850 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,800 mmcorrect |
| Unladen weight | 3,670 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Heuser 2 ACHS ANHANGER weigh?
The unladen weight is 3,670 kg.
What is the gross vehicle weight of the Heuser 2 ACHS ANHANGER?
18,000 kg.
Up to what speed is the Heuser 2 ACHS ANHANGER approved?
Approved up to 100 km/h.
What are the dimensions of the Heuser 2 ACHS ANHANGER?
4,850 mm × 2,550 mm.
When was the Heuser 2 ACHS ANHANGER built?
Production years: 2018.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.