Heizomat HM 6-300VM
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Heizomat – other models: the collective page of trailers outside the named ranges, Heizohack and HM 6-300VM, 3,400 to 3,500 kg unladen weight, 3,500 kg gross weight
This page gathers the Heizomat trailers the register could not assign to a named range. Heizomat, based in Gunzenhausen in the Maicha district, builds wood-chipping technology; the types listed here, Heizohack and HM 6-300VM, are chippers mounted on their own trailer chassis, used to turn brushwood and round timber into wood chips on site. As with many specialist-machine makers, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 3,400 to 3,500 kg, a gross weight of 3,500 kg and widths from 2,110 to 2,140 mm.
With unladen weight close to the gross weight of 3.5 tonnes, little margin is left for payload, which fits the design: most of the weight sits in the permanently mounted chipping unit rather than in capacity for loose cargo. Such trailer-mounted chippers are used by municipalities, contractors and landscape maintenance, towed directly behind a tractor or lorry without a drivetrain of their own.
On a used example, besides axle, wheel-bearing and brake-system condition, the state of the chipping knives, feed rollers and drive belts or the power take-off shaft, and the tightness of the hydraulics, all matter; rust on frame and drawbar and the condition of lighting and plug are also worth checking. Parts and service run through Heizomat itself.
Sources: SpecCodex register, model data: Heizomat (weitere Modelle), Heizomat (manufacturer)
Technical data
Dimensions and weights
| Length | 4,750 mmcorrect |
|---|---|
| Width | 2,140 mmcorrect |
| Wheelbase | 3,760 mmcorrect |
| Unladen weight | 3,400 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the Heizomat HM 6-300VM weigh?
The unladen weight is 3,400 kg.
What is the gross vehicle weight of the Heizomat HM 6-300VM?
3,500 kg.
Up to what speed is the Heizomat HM 6-300VM approved?
Approved up to 80 km/h.
What are the dimensions of the Heizomat HM 6-300VM?
4,750 mm × 2,140 mm.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
