Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Heinrich Lanz › Other models › HR 2

Heinrich Lanz HR 2

Built: 1927–1929 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The HR 2 comes from Heinrich Lanz. Production: 1927–1929. The engine delivers 22 hp (16.1 kW), has 1 cylinder. Rated speed is 500 rpm. The machine is 3,200 mm long, 1,650 mm wide and 2,100 mm high. The unladen weight is 2,500 kg. The wheelbase measures 1,800 mm. Top speed is 8 km/h. Transmission: 4V/4R. The engine is water-cooled. Tyres: front 900 x 200, rear 1.150 x 300. The fuel is Petroleum. Rohöl. Gasöl. The bore measures 225 mm. The stroke is 260 mm. Construction: unit construction (no separate frame). Around 7.224 units were built. Rated output across the Heinrich Lanz range ranges from 12 to 60 hp; the HR 2 sits in the lower part of that range with 22 hp. Its immediate neighbours are the SZL below it with 21 hp and the D 7006 above it with 25 hp. Rated output across the Heinrich Lanz range ranges from 8.8 to 43.9 kW; here the HR 2 sits in the lower part of that range with 16.1 kW. 89 Heinrich Lanz models across 27 series are on record.

Heinrich Lanz – other models: the collective page of the Mannheim Bulldog tractors with hot-bulb and diesel engines, petrol to crude oil and gas oil, 16.1 to 18.3 kW, 1,190 to 3,950 kg

This page gathers the Heinrich Lanz tractors the register could not assign to a named range – from early types such as the FMA/FMB and HR 2 to the diesel models D 2016, D 5506, D 6007 and D 9506. Heinrich Lanz founded his company in Mannheim, where the Bulldog was built from 1921: a tractor with a horizontal single-cylinder hot-bulb engine that needed no spark plug and was started on petrol before it could be switched to cheaper fuels such as paraffin, crude oil or gas oil. This multi-fuel ability made the Bulldog popular on farms worldwide before Lanz moved to water-cooled diesel engines in the post-war years. In 1956 John Deere took a majority stake in Lanz, and by 1960 the brand name had disappeared from the new-machine range.

Read on 3 more paragraphs

The register lists here 6 versions with 16.1 to 18.3 kW from one- to four-cylinder engines running at 500 to 680 revolutions per minute, unladen weights from 1,190 to 3,950 kg, lengths from 2,745 to 3,650 mm and heights from 1,850 to 2,270 mm; fuels range from petrol to paraffin, crude oil and gas oil.

The Lanz Bulldog counts among the defining designs of German agricultural-machinery history: robust, easy to repair and frugal on fuel, it became the standard farm tractor of the inter-war and post-war years and was also built under licence outside Germany.

On used examples, the condition of the hot bulb and cylinder, the cooling-water circuit and radiator, the clutch and gearbox, and the running gear and tyres all matter; spare parts today run mainly through specialist Bulldog clubs and tractor dealers.

Sources: SpecCodex register, model data: Heinrich Lanz (weitere Modelle), Lanz Bulldog (Wikipedia)

Technical data

Engine

FuelPetroleum, Rohöl, Gasölcorrect
Power22 hp (16.1 kW)correct
Rated speed500 rpmcorrect
Cylinders1correct
Bore225 mmcorrect
Stroke260 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,200 mmcorrect
Width1,650 mmcorrect
Height2,100 mmcorrect
Wheelbase1,800 mmcorrect
Unladen weight2,500 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox4V/4Rcorrect
Front tyres900 x 200correct
Rear tyres1.150 x 300correct
Top speed8 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built7,224correct

Where this model stands

Power-to-weight ratio: 6.4 kW/t (16 kW / 2.5 t)

Power class: Compact (< 40 hp)

Stronger than 9% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Heinrich Lanz HR 2 have?

The Heinrich Lanz HR 2 delivers 22 hp.

How much does the Heinrich Lanz HR 2 weigh?

The unladen weight is 2,500 kg.

What engine does the Heinrich Lanz HR 2 have?

1 cylinders, Petroleum, Rohöl, Gasöl.

How fast does the Heinrich Lanz HR 2 go?

Top speed is 8 km/h.

What are the dimensions of the Heinrich Lanz HR 2?

3,200 mm × 1,650 mm × 2,100 mm.

When was the Heinrich Lanz HR 2 built?

Production years: 1927–1929.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare