Heimann PT 35
Built: 2010-2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Heimann – other models: trailers outside the named series, A1 to A4, P2, H1 and PT 18/35 types, 360 to 2,800 kg kerb weight, 1,500 to 3,500 kg gross vehicle weight, class O2
This page collects Heimann units that the register could not assign to a named series. The range runs from simple single-axle types such as A1 and A2, through the letter-number combinations A3 and A4, to larger twin-axle versions such as PT 18 and PT 35, whose number indicates the load capacity in hundredweight. All versions fall within a gross vehicle weight of up to 3,500 kg and therefore class O2 (0.75 to 3.5 t), by far the largest market segment for private and trade trailers.
Read on 3 more paragraphs
The register lists 16 versions here with kerb weights from 360 to 2,800 kg and gross vehicle weights from 1,500 to 3,500 kg. Widths range from 1,800 to 2,550 mm, with lengths given from 5,020 to 6,600 mm, pointing to larger platform or livestock-transport versions within the range.
Trailers of this class form the core of the trade and private market: they serve as car trailers, horse or equipment transporters, and are offered mainly as unbraked versions up to 750 kg and braked versions up to 3.5 t, which allows them to be towed under most car driving-licence categories.
When buying used, check rust on the chassis, side panels and drawbar, the condition of the overrun brake and wheel bearings, tyre age, and the function of the lighting system; on platform trailers also check the load-bearing capacity of the floor and the secure fit of the ramp hinges, and on larger models the soundness of side panels and boards.
Technical data
Dimensions and weights
| Width | 2,450 mmcorrect |
|---|---|
| Wheelbase | 3,950 mmcorrect |
| Unladen weight | 980 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Heimann PT 35 weigh?
The unladen weight is 980 kg.
What is the gross vehicle weight of the Heimann PT 35?
3,500 kg.
Up to what speed is the Heimann PT 35 approved?
Approved up to 100 km/h.
When was the Heimann PT 35 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.