Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Hars › Other models › 299 S

Hars 299 S – specifications

Built: 2014 · Series: Other models

Data for the version built 2014 · Data origin: Reference work (Wikipedia/Wikibooks) · sources

More machines from model year 2014

The photo shows the 275 S from the same series. Source: technikboerse.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hars 299 S is a tractor built in 2014. 69 kW is available.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 37 to 69 kW; with 69 kW, the 299 S sits at the top. Below it ranks the 290 S with 56 kW.

Hars – other models: the collective page of tractors outside the named ranges, 240 S, 275 S, 290 S, 299 S and 3060 S with Perkins diesel engine, 37 to 69 kW

This page gathers the Hars tractors the register could not assign to a named range: the S range with the 240 S, 275 S, 290 S, 299 S and 3060 S types, all fitted with diesel engines from the British maker Perkins. The consistent S suffix across the whole range points to a uniform equipment line throughout the model programme.

Read on 3 more paragraphs

The register lists here 5 versions with 37 to 69 kW, or 49 to 92 hp, all with a Perkins diesel engine.

The consistent use of Perkins engines across the whole range is typical of smaller and medium tractor makers that rely on proven, worldwide-serviced bought-in engines rather than developing their own units; the power span covers the range from the smaller all-round tractor to the model for larger agricultural work such as tillage, transport and PTO-driven implements.

On these tractors, the condition of the Perkins engine and the injection system, rust on sheet metal and cab, the function of clutch and gearbox, and the condition of the hydraulics count; as Perkins engines are widespread worldwide, the parts supply for the drivetrain is generally straightforward, while body-specific parts are harder to source and depend on the individual dealer.

Sources: SpecCodex register, model data: Hars (weitere Modelle)

Technical data

Engine

Engine makePerkinscorrect
Fueldieselcorrect
Power92 hp (69 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantTurkey / Irancorrect

Frequently asked questions

How much power does the Hars 299 S have?

The Hars 299 S delivers 92 hp.

When was the Hars 299 S built?

Production years: 2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‍​‍‍‍‍‍⁠‌⁠‌​⁠⁠​‍⁠

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare