Harbeck BT9000M
Built: 1994 · Series: Other models
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Harbeck – other models: the collective page of German trailers outside the named ranges, from boat trailers to heavier utility trailers BT, DT, S and SA, 1,750 to 7,000 kg unladen weight, up to 26,000 kg gross weight
This page gathers the Harbeck trailers the register could not assign to a named range. Hermann Harbeck Fahrzeugbau GmbH & Co. KG, based in Waging am See, was founded in the 1940s and, with over 100,000 trailers built, ranks among Europe's largest boat-trailer manufacturers; alongside its core boat-transport business, the company also builds utility, horse and special trailers. The type codes BT, DT, S and SA mark the individual ranges, with the attached number denoting the capacity or size class.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 1,750 to 7,000 kg, gross weights from 5,500 to 26,000 kg, lengths from 9,150 to 12,660 mm and widths from 2,350 to 2,550 mm.
This collective page covers the heavier versions from the Harbeck range that go beyond the classic boat-trailer segment, reaching with gross weights of up to 26 tonnes into utility and special trailers for transport and municipal tasks; the boat-trailer expertise still shows in the galvanised running gear and the road-tested axle geometry carried over into these heavier versions.
When buying used, check the frame and axles for corrosion, especially on trailers with frequent water contact, along with the brakes, lighting and, on tippers, the hydraulics; Harbeck runs its own spare parts programme, so wear parts are available through the manufacturer in Waging am See.
Sources: SpecCodex register, model data: Harbeck (weitere Modelle), Harbeck Fahrzeugbau GmbH & Co. KG (manufacturer)
Technical data
Dimensions and weights
| Width | 2,450 mmcorrect |
|---|---|
| Wheelbase | 900 mmcorrect |
| Unladen weight | 2,425 kgcorrect |
| Gross vehicle weight | 12,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Harbeck BT9000M weigh?
The unladen weight is 2,425 kg.
What is the gross vehicle weight of the Harbeck BT9000M?
12,000 kg.
Up to what speed is the Harbeck BT9000M approved?
Approved up to 100 km/h.
When was the Harbeck BT9000M built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.