Harbeck BT3500
Built: 2007-2007 · Series: Trailers up to 3.5 t (Class O2)
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Harbeck trailers up to 3.5 t (Class O2) – the German trailer builder with a consistent B type series from 850 to 3,500 kg: 214 versions with AL/M/T equipment codes, unladen weights 219 to 2,300 kg
Class O2 groups together, according to registration data from the Netherlands and Finland, all trailers with a permissible gross weight from 0.75 to 3.5 tonnes. Harbeck is a German trailer manufacturer whose type designations in the register consistently begin with B, followed by a number for the payload or gross-weight class in kilograms and a code for the equipment variant – AL for open-sided versions, M and MCS for closed or more comfort-oriented variants, T for van-type bodies. The model range spans from B 850 to B 2000, showing the broad payload staggering of the programme.
Read on 3 more paragraphs
The register lists 214 versions with unladen weights from 219 to 2,300 kg and permissible gross weights from 850 to 3,500 kg. Lengths are recorded for 66 of the 214 vehicles and range from 4,090 to 11,090 mm, width for all 214 versions from 1,760 to 2,550 mm.
With a model range clearly staggered by payload and an unladen weight starting below 220 kg, Harbeck covers the full spectrum of light Class O2 trailers, from the small single-axle unit for private use to larger versions for commercial haulage.
For a used trailer of this type, check the function and adjustment of the overrun device including the handbrake cable, the condition of the brake linings, rubber torsion axles for cracks and uneven stance, frame and floor corrosion, and a functioning lighting system. For the larger, closed bodies (M, MCS), also check the tightness of the tarpaulin or body walls, and generally the age of the tyres regardless of tread depth.
Sources: Kennwerte der Modelle Harbeck Anhänger bis 3,5 t (Klasse O2)
Technical data
Dimensions and weights
| Width | 2,370 mmcorrect |
|---|---|
| Wheelbase | 740 mmcorrect |
| Unladen weight | 660 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Harbeck BT3500 weigh?
The unladen weight is 660 kg.
What is the gross vehicle weight of the Harbeck BT3500?
3,500 kg.
Up to what speed is the Harbeck BT3500 approved?
Approved up to 100 km/h.
When was the Harbeck BT3500 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.