Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Gutbrod › S › Super U6

Gutbrod Super U6 – specifications

Series: S

Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources

Source: atltf.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gutbrod Super U6 is a compact single-axle tractor from the S-series, designed as an agricultural traction vehicle. This model belongs to the tractor category and is equipped with a two-stroke engine operated on a fuel mixture. The design focuses on simple maintenance and low weight, facilitating its use in various agricultural environments.

The technical foundation is a single-cylinder two-stroke engine with a displacement of 206 cm³, delivering 6 hp at a rated speed of 3,800 rpm. This power level is intended for light draft work and driving smaller attached implements. Cooling is air-cooled, indicating an open engine compartment without a complex water circulation system. The transmission offers two forward gears, limiting speed selection to two stages. The maximum speed is 17.2 km/h, which is sufficient for short-distance transport between the field and the farm. The front tires, sized 4.00 12 AS, provide defined traction and stability during operation.

Within the S-series, the Super U6 occupies a specific position in the segment of light traction vehicles. As a single-axle tractor with this engine configuration, it is typically suitable for tasks that do not require high draft force, such as pulling small trailers or operating light soil cultivation equipment. The limited number of gears and low power make it a specialized machine for operations seeking simple mechanical solutions and low maintenance effort.

Technical data

Engine

Fuel2 Taktcorrect
Fuel2 Takt Gemischcorrect
Power6 hp (4.4 kW)correct
Rated speed3,800 rpmcorrect
Rated speed3800/mincorrect
Cylinders1correct
Cylinders1 Hubraumcorrect
Displacement206 cm³correct
Coolingair-cooledcorrect

Drivetrain and chassis

Forward gears2correct
Front tyres4.00 12 AScorrect
Top speed17.2 km/hcorrect
Drive typeGetriebecorrect

Other data

Gemisch kühlsystemair-cooledcorrect

Frequently asked questions

How much power does the Gutbrod Super U6 have?

The Gutbrod Super U6 delivers 6 hp.

What engine does the Gutbrod Super U6 have?

1 cylinders, 206 cm³ displacement, 2 Takt Gemisch.

How fast does the Gutbrod Super U6 go?

Top speed is 17.2 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​​‍‌‌​‍⁠‌​‍‍​​​​⁠‍

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare