Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Gs › AIL - 3700

Gs AIL - 3700

Built: 2018-2018 · Series: AIL

More machines from model year 2018

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gs AIL - 3700 is a machine built by Gs. Production: 2018. The machine is 2,550 mm wide. The unladen weight is 9,340 kg. Top speed is 100 km/h. The gross vehicle weight is 37,000 kg. Unladen weight across the Gs range ranges from 1,240 to 34,220 kg; the AIL - 3700 sits in the lower part of that range with 9,340 kg. Its immediate neighbours are the O-160-2700 K below it with 9,310 kg and the 0B-170-2700 K above it with 9,360 kg. 801 Gs models are on record. The model is listed under Trailers. 6 verified figures from 1 source are on file.

GS Meppel AIL – tipping semi-trailer range from the Dutch manufacturer: two- and three-axle, 26,400 to 45,000 kg gross weight, 5,900 to 11,580 kg unladen weight

This page gathers the AIL range from the Dutch tipping semi-trailer manufacturer GS Meppel, the middle segment between the light AI-2800 and the fixed three-axle AIL-3600. The models AIL 2320 M, AIL 2800, AIL 3000, AIL 3600 B, AIL 3700 D/DB and AIL 3800 B use the number in the designation to mark different payload steps, while M, B and D denote body variants of the tipping body.

Read on 3 more paragraphs

The register lists here 10 versions with unladen weights from 5,900 to 11,580 kg, gross weights from 26,400 to 45,000 kg, lengths from 10,270 to 10,950 mm and a uniform width of 2,550 mm.

Spanning almost 26 to 45 tonnes, the AIL range covers the whole GS Meppel programme between two- and three-axle and forms the basis for customer-specific configuration of tipping semi-trailers for earthworks, recycling and agricultural transport in the Netherlands and neighbouring countries.

On a used tipper, the condition of the tipping body, side boards and tailgate, wear on the hydraulic ram and tipping valves, corrosion of the body and frame side members, the braking system and air suspension, and the kingpin and landing legs all count; parts run through GS Meppel and the usual trailer suppliers.

Sources: Kennwerte der Modelle Gs AIL

Technical data

Dimensions and weights

Width2,550 mmcorrect
Unladen weight9,340 kgcorrect
Gross vehicle weight37,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Gs AIL - 3700 weigh?

The unladen weight is 9,340 kg.

What is the gross vehicle weight of the Gs AIL - 3700?

37,000 kg.

Up to what speed is the Gs AIL - 3700 approved?

Approved up to 100 km/h.

When was the Gs AIL - 3700 built?

Production years: 2018.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare