Gs AIC 3000N
Built: 2003 · Series: AIC
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Gs AIC – semi-trailer series: from light-duty to the 36-tonne version, 3,000 to 5,260 kg unladen weight, 16,000 to 36,000 kg gross weight
The AIC series gathers semi-trailers from the Gs brand, consistently designated with the prefix AIC followed by a four-digit code for construction size and payload, supplemented by letter suffixes such as N, L, K or LBM for individual equipment variants. The series thus shows a consistent numbering system in which higher values consistently denote greater payload.
Read on 3 more paragraphs
The register lists 24 versions with an unladen weight of 3,000 to 5,260 kg and a gross weight of 16,000 to 36,000 kg. Lengths range from 8,750 to 10,780 mm and widths from 2,440 to 2,520 mm.
Semi-trailers of this series cover commercial goods transport in the mid to upper weight segment and compete with numerous European makers of comparable semi-trailers in the range of 16 to 36 tonnes gross weight. Semi-trailers in this market segment are often used in cross-border European freight transport, where they circulate in the daily exchange between tractor units of different hauliers.
When buying used, check the frame and kingpin housing for cracks and wear, as well as the axles, brake system and suspension for condition and tightness. Standard checks include tyres, lighting and the load bed coating. On extendable frame sections, also check the locking mechanism and the condition of the slide rails. The rear underrun protection and the condition of the support jack should also be assessed. Spare parts for axles and brake systems are available through the general commercial vehicle parts trade.
Sources: SpecCodex register, model data: Gs AIC
Technical data
Dimensions and weights
| Length | 9,620 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 5,210 mmcorrect |
| Unladen weight | 4,400 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Gs AIC 3000N weigh?
The unladen weight is 4,400 kg.
What is the gross vehicle weight of the Gs AIC 3000N?
30,000 kg.
Up to what speed is the Gs AIC 3000N approved?
Approved up to 100 km/h.
What are the dimensions of the Gs AIC 3000N?
9,620 mm × 2,480 mm.
When was the Gs AIC 3000N built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AIC - 1800 N
AIC - 2000
AIC - 2000 L
AIC - 2000 LBM
AIC - 2000 N
AIC - 2800 LB
AIC - 3000
AIC - 3000 R
AIC - 3600 N
AIC -2700 LBM
AIC -3000 N
AIC 1600
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.