Gs AI2800
Built: 2000-2000 · Series: AI-2800
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
GS Meppel AI-2800 – tipping semi-trailer range from the Dutch manufacturer: two-axle with 28,000 kg gross weight, 4,480 to 8,390 kg unladen weight, 10.1 to 11.3 m length
This page gathers the AI-2800 range from the Dutch manufacturer GS Meppel, which builds tipping semi-trailers for road haulage of bulk material. The AI-2800 designation names the fixed payload class of the two-axle chassis; the variants C, H, J, KU, L-24 U, LR and LSU differ in body and equipment detail of the tipping body.
Read on 3 more paragraphs
The register lists here 8 versions with unladen weights from 4,480 to 8,390 kg, a uniform gross weight of 28,000 kg, lengths from 10,100 to 11,280 mm and widths from 2,470 to 2,600 mm.
Tipping semi-trailers of this two-axle class are the lighter end of the GS Meppel range and run mainly in short-haul and regional transport of excavated earth, recycling material and bulk agricultural produce, where the lower unladen weight allows more payload per trip than the marque's three-axle versions.
On a used tipper, the condition of the tipping body and hydraulic ram, the tightness of the side boards and tailgate, corrosion of the body and frame from abrasive loads, the braking system and air suspension, and the tightness of the tipping valves all count; parts run through GS Meppel itself and the usual trailer suppliers.
Sources: Kennwerte der Modelle Gs AI-2800
Technical data
Dimensions and weights
| Length | 10,100 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,380 mmcorrect |
| Unladen weight | 7,360 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Gs AI2800 weigh?
The unladen weight is 7,360 kg.
What is the gross vehicle weight of the Gs AI2800?
28,000 kg.
Up to what speed is the Gs AI2800 approved?
Approved up to 100 km/h.
What are the dimensions of the Gs AI2800?
10,100 mm × 2,550 mm.
When was the Gs AI2800 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.