Start › Trailers › Grw Engineering › NOT APPLICABLE

Grw Engineering NOT APPLICABLE

Built: 2025-2025 · Series: Other models

The photo shows the NOT APPLICABLE from the same series. Source: https://www.wirtgen-group.com/ru-ua/news-and-media/hamm/new-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Grw Engineering NOT APPLICABLE is a machine built by Grw Engineering. Production: 2025. The machine is 13,150 mm long and 2,550 mm wide. The unladen weight is 6,600 kg. The wheelbase measures 8,610 mm. Top speed is 100 km/h. The gross vehicle weight is 40,000 kg. The machine runs on 6 wheels. Unladen weight within this group ranges from 253 to 84,800 kg; the NOT APPLICABLE sits at the bottom of that range with 6,600 kg. Its immediate neighbours are the E. 1454 below it with 6,599 kg and the SK 2442 ZI AL above it with 6,605 kg. The model is listed under Trailers. 10 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length13,150 mmcorrect
Width2,550 mmcorrect
Wheelbase8,610 mmcorrect
Unladen weight6,600 kgcorrect
Gross vehicle weight40,000 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Grw Engineering NOT APPLICABLE weigh?

The unladen weight is 6,600 kg.

What is the gross vehicle weight of the Grw Engineering NOT APPLICABLE?

40,000 kg.

Up to what speed is the Grw Engineering NOT APPLICABLE approved?

Approved up to 100 km/h.

What are the dimensions of the Grw Engineering NOT APPLICABLE?

13,150 mm × 2,550 mm.

When was the Grw Engineering NOT APPLICABLE built?

Production years: 2025.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

N/A

NOT APPLICABLE

TS63 S3C

TS63 S3C

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare