Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Grdane Trail › 7331 TRA 42

Grdane Trail 7331 TRA 42

Built: 1990 · Series: Other models

More machines from model year 1990

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 7331 TRA 42 comes from Grdane Trail. Production: 1990. The machine is 12,900 mm long and 2,600 mm wide. The unladen weight is 7,860 kg. The wheelbase measures 8,800 mm. Top speed is 100 km/h. The gross vehicle weight is 27,000 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the 7331 TRA 42 sits at the bottom of that range with 7,860 kg. Its immediate neighbours are the 3H0005AA SZ 304 27 below it with 7,853 kg and the RAS-10-19PCDD above it with 7,864 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the 7331 TRA 42 sits at the bottom of that range with 27,000 kg.

Grdane Trail 7331 TRA 42 – EU category O4 trailer: 27,000 kg gross weight, 7,860 kg unladen weight, 12,900 mm length, 8,800 mm wheelbase

With a gross weight of 27,000 kg, the 7331 TRA 42 falls into EU trailer category O4, the group of heavy trailers above 10 tonnes.

Read on 3 more paragraphs

Unladen weight is 7,860 kg, giving a payload of 19,140 kg – a good seven-tenths of the gross weight. Length stands at 12,900 mm, width at 2,600 mm and wheelbase at 8,800 mm; the axle group sits far back on a very long body.

Air brakes are required in this weight class; a mechanical overrun brake is no longer permitted above roughly 3.5 tonnes gross weight. The far-back wheelbase points to a trailer for long, bulky goods such as pipes, sections or construction machinery, where the load area stays free of axles over a large part of the vehicle's length. The tow vehicle would be a lorry or tractor unit requiring category CE.

On a used example, what counts is the condition of the brake system and linings, the tightness of the air lines, and rust at the frame, drawbar and axle mounts. With the wheelbase set this far back, it is also worth checking the frame for distortion in the front, unsupported section, which is exposed to greater bending stress under uneven loading. The pins and bushings where the drawbar attaches to the frame are also worth checking for wear, since they carry the full towing load at the far end of a long lever arm over the years. A recent inspection report is useful too.

Sources: SpecCodex-Register: Kennwerte des Modells Grdane Trail 7331 TRA 42

Technical data

Dimensions and weights

Length12,900 mmcorrect
Width2,600 mmcorrect
Wheelbase8,800 mmcorrect
Unladen weight7,860 kgcorrect
Gross vehicle weight27,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Grdane Trail 7331 TRA 42 weigh?

The unladen weight is 7,860 kg.

What is the gross vehicle weight of the Grdane Trail 7331 TRA 42?

27,000 kg.

Up to what speed is the Grdane Trail 7331 TRA 42 approved?

Approved up to 100 km/h.

What are the dimensions of the Grdane Trail 7331 TRA 42?

12,900 mm × 2,600 mm.

When was the Grdane Trail 7331 TRA 42 built?

Production years: 1990.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare