Goebel ANH 18
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Goebel – other models: trailers from light to heavy outside the named series, ANH 18 and NA16TL types, 410–13,730 kg kerb weight and 1,350–35,500 kg gross vehicle weight
This page gathers the Goebel trailers that the register could not assign to a named series. The range spans from small single-axle trailers to heavy low-loaders; type designations such as ANH 18, NA16TL and VA170 combine a letter code with a number. As a collection page, it gathers models that fall outside the series maintained separately in the register.
Read on 3 more paragraphs
The register lists 4 versions here with kerb weights from 410 to 13,730 kg, gross vehicle weights from 1,350 to 35,500 kg, lengths from 9,330 to 13,800 mm and widths from 1,290 to 2,550 mm.
The wide span from just over 400 kg to almost 14 tonnes kerb weight shows that this collection page gathers very different trailer types, from light single-axle units for trades and leisure to heavy low-loaders for construction machinery and abnormal-load transport. An individual buyer should therefore judge each model by its intended use rather than by the collection page as a whole.
When buying one of these used, different points matter depending on the version: on the light models the overrun brake, axle and tyres, on the heavy low-loaders additionally the frame and chassis rails for cracks, the brake system with its pads, and the landing legs. Parts for axles, brakes and lighting come from the general trailer-parts trade. The registration papers and the validity of the roadworthiness inspection are also worth checking before purchase.
Sources: SpecCodex register, model data: Goebel (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,330 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 5,060 mmcorrect |
| Unladen weight | 2,930 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Goebel ANH 18 weigh?
The unladen weight is 2,930 kg.
What is the gross vehicle weight of the Goebel ANH 18?
18,000 kg.
Up to what speed is the Goebel ANH 18 approved?
Approved up to 100 km/h.
What are the dimensions of the Goebel ANH 18?
9,330 mm × 2,500 mm.
When was the Goebel ANH 18 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
