Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Trucks › GMC › SILVERADO K2500

GMC SILVERADO K2500

Built: 2001 · Series: Trucks up to 3.5 t (Class N1)

More machines from model year 2001

The photo shows the Sierra K 2500 from the same series. Source: https://commons.wikimedia.org/wiki/File:GMC_C-K1500_Sierra_E

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The GMC SILVERADO K2500 is a model in the Trucks up to 3.5 t (Class N1) series. Production: 2001. The engine has 8 cylinders, with a displacement of 5,300 cm³. The vehicle is 2,020 mm wide. The unladen weight is 2,890 kg. The wheelbase measures 3,650 mm. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. The Trucks up to 3.5 t (Class N1) series covers 34 models. Unladen weight within it ranges from 2,050 to 3,380 kg; the SILVERADO K2500 sits in the upper part of that range with 2,890 kg. Its immediate neighbours are the TRUCK 3500 below it with 2,880 kg and the VALUE VAN above it with 2,900 kg. Gross vehicle weight within it ranges from 3,490 to 3,500 kg; here the SILVERADO K2500 sits at the top of that range with 3,500 kg. 1090 GMC models across 32 series are on record.

GMC Lkw bis 3,5 t (class N1) – registration collective page of light GMC commercial vehicles Sierra, Silverado, Savana and Rally: six- and eight-cylinder from 3,900 to 7,500 cm³, gross weights around 3.5 tonnes

This page is a registration collective page rather than a single GMC range: class N1 denotes, in the European vehicle register, light commercial vehicles with a gross vehicle weight of up to 3.5 tonnes. Gathered here are GMC models that reach this limit, from the Sierra and Silverado pickups to the large Savana and Rally vans and older C/K models. GMC (General Motors Truck Company) is General Motors' commercial-vehicle brand, sharing platforms and technology largely with sister marque Chevrolet but marketed with its own trim and dealer network.

Read on 3 more paragraphs

The register lists 34 versions here from six- to eight-cylinder engines of 3,900 to 7,500 cm³, kerb weights of 2,050 to 3,380 kg and gross vehicle weights of 3,490 to 3,500 kg, confirming the classification into class N1 at its upper limit. Lengths range from 5,520 to 7,640 mm with widths of 1,950 to 2,480 mm.

GMC pickups and vans compete in North America with the practically identical Chevrolet models as well as with Ford and Ram in the large light-commercial segment, and in Europe are used mainly as imported and enthusiast vehicles. Gross weights just under 3.5 tonnes allow use with an ordinary car driving licence in many European countries.

On imported GMC models, key checks include frame corrosion, the condition of the leaf springs and the often large-displacement V8 engines, as well as the automatic transmission and brake system to US standards. On the Savana and Rally vans, the condition of the sliding doors and body seals should also be checked. Spare parts are readily available through American import trade thanks to the close technical kinship with Chevrolet.

Sources: SpecCodex register, model data: GMC Lkw bis 3,5 t (Klasse N1), GMC (General Motors, Hersteller)

Technical data

Engine

Cylinders8correct
Displacement5,300 cm³correct

Dimensions and weights

Width2,020 mmcorrect
Wheelbase3,650 mmcorrect
Unladen weight2,890 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the GMC SILVERADO K2500 weigh?

The unladen weight is 2,890 kg.

What is the gross vehicle weight of the GMC SILVERADO K2500?

3,500 kg.

What engine does the GMC SILVERADO K2500 have?

8 cylinders, 5,300 cm³ displacement.

When was the GMC SILVERADO K2500 built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

250

2500

3500 HD

454

C 30

C 35

C1500

C20 FLEETSIDE

C20 SIERRA GRANDE

CCW353

CHEV.PICK-UP K3500

CHEVY VAN 30

Sources: [1] [2]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare