Gk Grunenfelder SLA 6.5
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
GK Grünenfelder – other models: the collective page for LA and SLA series trailers outside the named models, kerb weight from 1,730 to 5,300 kg, permissible gross weight from 3,500 to 15,000 kg
This collective page covers GK Grünenfelder trailers that the register does not assign to a named series. It lists versions of the LA and SLA series, where the digits after the SLA code – such as 5.1 or 6.5 – indicate different size steps within the series.
Read on 3 more paragraphs
The register lists 5 versions with a kerb weight of 1,730 to 5,300 kg and a permissible gross weight of 3,500 to 15,000 kg. Lengths range from 6.78 to 9.26 m, widths from 2.23 to 2.60 m.
With gross weights of 3,500 to 15,000 kg, the range spans lighter tandem-axle trailers through to heavier three-axle versions for hauling materials and equipment in agriculture and commercial use. The wide span of the SLA series thus covers different payload requirements. The more than fourfold difference in gross weight between the lightest and heaviest version – 3,500 versus 15,000 kg – shows how wide the range of applications for the SLA series is on this collective page.
When buying used, check the frame and load platform for corrosion and deformation, particularly in the axle suspension of the heavier multi-axle versions. The brake system, axle bearings and tyres should be checked, along with the condition and operation of the sides and their locking mechanisms. Spare parts for axles and brake components are available through the general commercial-vehicle accessories trade.
Sources: SpecCodex register, model data: GK Grünenfelder (weitere Modelle)
Technical data
Dimensions and weights
| Length | 7,330 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Wheelbase | 4,920 mmcorrect |
| Unladen weight | 2,500 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Gk Grunenfelder SLA 6.5 weigh?
The unladen weight is 2,500 kg.
What is the gross vehicle weight of the Gk Grunenfelder SLA 6.5?
3,500 kg.
Up to what speed is the Gk Grunenfelder SLA 6.5 approved?
Approved up to 100 km/h.
What are the dimensions of the Gk Grunenfelder SLA 6.5?
7,330 mm × 2,300 mm.
When was the Gk Grunenfelder SLA 6.5 built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
