Giubergia Preferida
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Giubergia – other models: the collective page of Argentine combine harvesters outside the named ranges, Furia to Super GTE, 69 to 130 kW, Perkins, Mercedes-Benz and Bedford engines
This page gathers the Giubergia combine harvesters the register could not assign to a named range. Giubergia is an Argentine maker of harvesting machines; the model names Furia, Preferida and the Super range (Super, Super G, Super GT, Super GTE) mark successive development stages, with the suffixes G, GT and GTE marking increasing equipment and power. The engines come from Perkins, Mercedes-Benz and Bedford – British and German makers common in South American farm-machinery building of the post-war era.
Read on 3 more paragraphs
The register lists here 6 versions with 69 to 130 kW (93 to 180 hp), with diesel engines.
Giubergia is among the Argentine combine makers that, alongside international brands such as Deutz-Fahr and Claas, serve the domestic market of the vast grain and soybean growing areas of the Pampas, with machines built for robustness and ease of repair under simple workshop conditions.
On used combines, the condition of the threshing unit and sieves, the condition of the header and chopper, engine and hydraulic condition, and rust on bodywork count; spares for the Perkins and Bedford engines are available through the open parts market, Giubergia's own components mostly only regionally in Argentina.
Sources: SpecCodex register, model data: Giubergia (weitere Modelle)
Technical data
Engine
| Engine make | Perkins; Mercedes-Benzcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 93 ; 110 hp (69 ; 82 kW)correct |
| Displacement | 6correct |
| Turbocharger | nocorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Forward gears | 5correct |
|---|---|
| Reverse gears | 1correct |
| Clutch | drycorrect |
| Front tyres | 18, 4x30" 8 plycorrect |
| Rear tyres | 750x18" 6 plycorrect |
Origin and approval
| Plant | Venado Tuerto, Santa Fe, Argentinacorrect |
|---|
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.
