Start › Telehandlers › Genie › GTH844

Genie GTH844

Series: Genie Telescopic Forklift

Source: https://www.ritchielist.com/construction/telehandlers-teleha

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The GTH844 from Genie is part of the Genie Telescopic Forklift series. The engine delivers 75 hp (55.2 kW). The unladen weight is 10,206 kg. The wheelbase measures 3,450.3 mm. Ground clearance is 432.8 mm. The tank holds 121.1 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 26.1 l/min. Working pressure is 206.8 bar. The engine fitted is the 1104C-44T. Tyre size: 13 x 24 in. 12 ply. The Genie Telescopic Forklift series covers 20 models. Rated output within it ranges from 63.9 to 161.8 hp; the GTH844 sits at the bottom of that range with 75 hp. Its immediate neighbours are the GTH2506 below it with 68 hp and the GTH3512 above it with 81.6 hp. 144 Genie models across 9 series are on record. The model is listed under Telehandlers. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine model1104C-44Tcorrect
Power75 hp (55.2 kW)correct
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase3,450.3correct
Ground clearance432.8correct
Unladen weight10,206 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears3correct
Reverse gears3correct
Tyre size13 x 24 in, 12 plycorrect

Working data

Pump flow26.1 l/mincorrect
Hydraulic pressure206.8correct
Fuel tank capacity121.1 lcorrect

Where this model stands

Power-to-weight ratio: 5.4 kW/t (55 kW / 10.2 t)

Stronger than 11% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Genie GTH844 have?

The Genie GTH844 delivers 75 hp.

How much does the Genie GTH844 weigh?

The unladen weight is 10,206 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

GTH-1256

GTH-1544

GTH1048

GTH1056

GTH2506

GTH3007

GTH3512

GTH3518R

GTH4010SX

GTH4013EX

GTH4013SX

GTH4017EX

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare