Start › Telehandlers › Genie › GTH3512

Genie GTH3512

Series: Genie Telescopic Forklift

Source: https://www.technikboerse.com/gebraucht/teleskoplader-354/ge

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The GTH3512 from Genie is part of the Genie Telescopic Forklift series. The engine delivers 81.6 hp (60 kW). The unladen weight is 9,000 kg. The wheelbase measures 2,752.3 mm. Ground clearance is 432.8 mm. The tank holds 92.4 litres. The gearbox has 2 forward gears. The pump delivers 82.1 l/min. The hydraulic tank holds 90.1 litres. Working pressure is 280 bar. Tyre size: 405/70 20 PR16. The Genie Telescopic Forklift series covers 20 models. Rated output within it ranges from 63.9 to 161.8 hp; the GTH3512 sits in the lower part of that range with 81.6 hp. Its immediate neighbours are the GTH844 below it with 75 hp and the GTH3007 above it with 92.5 hp. 144 Genie models across 9 series are on record. The model is listed under Telehandlers. 13 verified figures from 1 source are on file.

Technical data

Engine

Power81.6 hp (60 kW)correct
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase2,752.3correct
Ground clearance432.8correct
Unladen weight9,000 kgcorrect

Drivetrain and chassis

Gearbox typetwo-speed mechanical gearbox gearboxcorrect
Forward gears2correct
Tyre size405/70 20 PR16correct

Working data

Pump flow82.1 l/mincorrect
Hydraulic oil capacity90.1 lcorrect
Hydraulic pressure280correct
Fuel tank capacity92.4 lcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (60 kW / 9 t)

Stronger than 17% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Genie GTH3512 have?

The Genie GTH3512 delivers 81.6 hp.

How much does the Genie GTH3512 weigh?

The unladen weight is 9,000 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

GTH-1256

GTH-1544

GTH1048

GTH1056

GTH2506

GTH3007

GTH3518R

GTH4010SX

GTH4013EX

GTH4013SX

GTH4017EX

GTH4017SX

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare