Start › Telehandlers › Gehl › RS5-19

Gehl RS5-19

Series: Gehl Telescopic Forklift

The photo shows the RS6-34 from the same series. Source: https://www.lectura-specs.pl/pl/model/wozki-podnosne-widlowe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gehl RS5-19 belongs to the Gehl Telescopic Forklift series. The engine delivers 47.7 kW. Rated speed is 2,750 rpm. The unladen weight is 4,535.9 kg. The wheelbase measures 2,292.1 mm. The tank holds 64.4 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The pump delivers 83.3 l/min. The hydraulic tank holds 68.1 litres. Working pressure is 231 bar. The engine fitted is the TD2009 L04. Tyre size: 12,00x16,5 bias/10 PR. The Gehl Telescopic Forklift series covers 21 models. Rated output within it ranges from 43.3 to 85.8 kW; the RS5-19 sits at the bottom of that range with 47.7 kW. Its immediate neighbours are the CT5-16 below it with 43.3 kW and the CT5-16 Turbo above it with 55.9 kW. 72 Gehl models across 9 series are on record. The model is listed under Telehandlers. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelTD2009 L04correct
Power47.7 kWcorrect
Rated speed2,750 rpmcorrect
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase2,292.1correct
Unladen weight4,535.9 kgcorrect

Drivetrain and chassis

Gearbox typerexrothcorrect
Forward gears2correct
Reverse gears2correct
Tyre size12.00x16.5 bias/10 PRcorrect

Working data

Pump flow83.3 l/mincorrect
Hydraulic oil capacity68.1 lcorrect
Hydraulic pressure231correct
Fuel tank capacity64.4 lcorrect

Where this model stands

Power-to-weight ratio: 10.5 kW/t (48 kW / 4.5 t)

Stronger than 7% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Gehl RS5-19 have?

The Gehl RS5-19 delivers 47.7 kW.

How much does the Gehl RS5-19 weigh?

The unladen weight is 4,536 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

6H

6L

8H

CT5-16

CT5-16 Turbo

CT6-18 Low Profile

CT6-18 Turbo

CT7-23 Turbo

DL11-44

DL11-55

DL12-40

DL7-44

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare