Gebrüder Holder E 1100
Built: 1981–1992 · Series: E-Reihe
More machines from model year 1981
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Gebrüder Holder E series: small single-cylinder diesel implement carriers from Metzingen, E 1100 and E 1300, 6.25 to 8.8 kW, around 150 kg unladen weight
The E series comes from Gebrüder Holder of Metzingen in Baden-Württemberg, the founding company of today's Holder group, which built small implement carriers and mini tractors for agriculture from the post-war years onward. The Holder brothers founded their company in 1888, initially as a metalworking shop, before turning to motorised implement carriers for agriculture from the 1930s. The E 1100 and E 1300 are light, single-cylinder-powered models for smaller plots and work with mounted implements.
Read on 3 more paragraphs
The register lists 2 versions here with 6.25 to 8.8 kW from single-cylinder engines of 392 to 510 cm³, an unladen weight of 150 kg, a length of 1,900 mm, a width of 760 mm and a height of 1,150 mm at a rated speed of 3,000 to 3,600 rpm.
As light implement carriers, the E series was aimed at smaller farms and specialty crops that needed a manoeuvrable, single-cylinder-powered carrier for mounted implements, before Holder expanded its range with larger, multi-cylinder models. After the E series' success, Holder expanded its range with larger, multi-cylinder implement carriers for more demanding tasks.
When buying one of these small single-cylinder machines, attention should go to the condition of the engine and clutch, the tightness of the fuel lines, frame rust, and the function of the implement mount, as well as the function of the implement hydraulics, where fitted, and the integrity of the seat mount; spare parts for these early Holder models are now only available in limited supply through specialist dealers.
Sources: SpecCodex register, model data: Gebrüder Holder E-Reihe, Holder (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 8.5 hp (6.25 kW)correct |
| Rated speed | 3,600 rpmcorrect |
| Cylinders | 1correct |
| Displacement | 392 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 1,900 mmcorrect |
|---|---|
| Width | 760 mmcorrect |
| Height | 1,150 mmcorrect |
| Unladen weight | 150 kgcorrect |
Drivetrain and chassis
| Drive | single-axle drivecorrect |
|---|---|
| Gearbox | 2*(L+S+R)correct |
| Front tyres | 5.00x10 AScorrect |
| Top speed | 17 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 41.7 kW/t (6 kW / 0.1 t)
Power class: Compact (< 40 hp)
Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Gebrüder Holder E 1100 have?
The Gebrüder Holder E 1100 delivers 8.5 hp.
How much does the Gebrüder Holder E 1100 weigh?
The unladen weight is 150 kg.
What engine does the Gebrüder Holder E 1100 have?
1 cylinders, 392 cm³ displacement, Diesel.
How fast does the Gebrüder Holder E 1100 go?
Top speed is 17 km/h.
What are the dimensions of the Gebrüder Holder E 1100?
1,900 mm × 760 mm × 1,150 mm.
When was the Gebrüder Holder E 1100 built?
Production years: 1981–1992.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
