Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Gaz › Other models › GAZ-2332 CityVan

Gaz 2332 CityVan

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gaz-2332 CityVan is a vehicle built by Gaz. The vehicle is 4,500 mm long, 1,814 mm wide and 2,000 mm high. The wheelbase measures 2,830 mm. 33 Gaz models across 7 series are on record.

GAZ – other models: the collective page outside the named ranges, from the GAZ-69 off-roader through the GAZ-63 four-wheel-drive lorry to the GAZelle van, four- to six-cylinders of 2,430 to 3,500 cm³

This page gathers GAZ vehicles the register could not assign to a named range, from the post-war GAZ-69 off-roader through the four-wheel-drive GAZ-63 lorry to the modern GAZelle van, the GAZ-2705, and the GAZ-2332 CityVan. GAZ (Gorky Automobile Plant) of Nizhny Novgorod, founded in 1932 as a Soviet car works, built the GAZ-69 from 1953 as a military and civilian off-roader and the GAZ-63 from 1948 as a four-wheel-drive 2-tonne lorry; in some Western European vehicle registers the GAZ-69 is listed under the Jeep brand, as shown by the model names JEEP 69M-4X4 and JEEP 69ME-4X4 on this page.

Read on 3 more paragraphs

The register lists here 9 versions with about 53 kW, four- to six-cylinders of 2,430 to 3,500 cm³, unladen weights from 1,460 to 2,715 kg, gross weights from 2,135 to 3,500 kg, lengths from 3,850 to 4,500 mm and widths from 1,740 to 2,060 mm.

Alongside UAZ and Lada, GAZ is one of the defining Soviet and Russian car makers, and with its range from light off-roaders to lorries and, with the GAZelle range, Russia's most widely built van, it covers a broad spectrum; the GAZ-69 and GAZ-63 served for decades with the military, agriculture and civil defence across the entire Eastern Bloc.

On the older GAZ models, rust on the frame and body, the condition of the propshafts and transfer case, the carburettor and electrics count, and on the GAZelle range additionally the condition of the engine, suspension and brakes under continuous commercial load; parts for the classics run mainly through specialist Eastern European dealers, and for the GAZelle through the regular GAZ network.

Sources: SpecCodex register, model data: Gaz (weitere Modelle), GAZ Group (manufacturer)

Technical data

Engine

EngineOttomotor:2, 5 Liter (101 kW)correct

Dimensions and weights

Length4,500 mmcorrect
Width1,814 mmcorrect
Height2,000 mmcorrect
Wheelbase2,830 mmcorrect

Frequently asked questions

What are the dimensions of the Gaz 2332 CityVan?

4,500 mm × 1,814 mm × 2,000 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare