Technical register for agricultural, construction and commercial machinery · sourced data
StartVansFuso › CANTER JPM

Fuso CANTER JPM

Built: 2016-2021 · Series: Other models

More machines from model year 2016

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CANTER JPM comes from Fuso. Production: 2016-2021. The engine has 4 cylinders, with a displacement of 2,998 cm³. The machine is 5,110 mm long and 2,200 mm wide. The unladen weight is 2,960 kg. The wheelbase measures 3,400 mm. Top speed is 139 km/h. The gross vehicle weight is 3,500 kg. The machine runs on 6 wheels. Unladen weight across the Fuso range ranges from 2,417 to 7,702 kg; the CANTER JPM sits at the bottom of that range with 2,960 kg. Its immediate neighbours are the CANTER 3C15 AMT CC 340 4X2 3,5T below it with 2,943 kg and the CITY FLOH 27 WH-M 6071639 above it with 3,215 kg. 16 Fuso models across 2 series are on record. The model is listed under Vans. 12 verified figures from 1 source are on file.

Fuso – other models: collective page of the Mitsubishi Fuso Canter light truck outside the named ranges, 3.5t chassis with four-cylinder diesel, AMT automation, 2.4 to 3.2t unladen weight

This page gathers the Mitsubishi Fuso Canter models the register could not assign to a named range, from the classic CANTER 3C15 to variants with automated manual transmission (AMT). The Canter is Mitsubishi Fuso's light truck and van range, majority-owned by Daimler since 2003; the type designation combines a digit for the payload class with a code for wheelbase and cab, here consistently in the 3.5-tonne class with a four-cylinder diesel engine.

Read on 3 more paragraphs

The register lists here 6 versions with 2,998cc displacement from four cylinders, 2,417 to 3,215kg unladen weight against a gross vehicle weight of 3,390 to 3,500kg, 5,110 to 6,200mm length and 1,900 to 2,250mm width.

The Canter is one of the most widely chosen chassis for box, tipper and dropside bodies in the 3.5-tonne segment, competing directly with the Iveco Daily, Mercedes-Benz Sprinter and Ford Transit; the AMT version reduces fuel consumption in distribution work compared with the classic manual gearbox.

When buying used, check the turbocharger, EGR valve and particulate filter of the four-cylinder diesel, the condition of the leaf springs and rear brake drums, the function of the AMT clutch under frequent stop-and-go use, and rust protection on the frame and body mounting points; spare parts run through the Fuso dealer network.

Sources: Kennwerte der Modelle Fuso (weitere Modelle), Mitsubishi Fuso (Hersteller)

Technical data

Engine

Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Length5,110 mmcorrect
Width2,200 mmcorrect
Wheelbase3,400 mmcorrect
Unladen weight2,960 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed139 km/hcorrect

Frequently asked questions

How much does the Fuso CANTER JPM weigh?

The unladen weight is 2,960 kg.

What is the gross vehicle weight of the Fuso CANTER JPM?

3,500 kg.

What engine does the Fuso CANTER JPM have?

4 cylinders, 2,998 cm³ displacement.

How fast does the Fuso CANTER JPM go?

Top speed is 139 km/h.

What are the dimensions of the Fuso CANTER JPM?

5,110 mm × 2,200 mm.

When was the Fuso CANTER JPM built?

Production years: 2016-2021.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare