Furcar CRAFTER
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Crafter-type body – long panel van with twin rear wheels: 2.0-litre four-cylinder diesel, 4,490mm wheelbase, 2,200mm width, 557kg payload, model year 2022
A panel van bearing the model designation Crafter belongs to the class of large-volume vans common in European parcel and general freight transport. The body recorded here carries twin rear wheels and a long wheelbase for high load volumes.
Read on 3 more paragraphs
The four-cylinder diesel engine has a displacement of 1,968cc. With a gross vehicle weight of 3,500kg and an unladen weight of 2,943kg, a payload of 557kg remains. A wheelbase of 4,490mm combined with a width of 2,200mm on six wheels results in a long panel van with twin rear wheels.
With a gross vehicle weight of 3,500kg, the vehicle stays within EU category N1 and can be driven on a category B licence. The long 4,490mm wheelbase gives noticeably more load length than shorter panel vans, while the high unladen weight of almost 2,950kg limits the payload accordingly.
When buying a used, long panel van of this kind, the condition of the twin rear wheels and rear axle matters most, as these come under heavy strain when the payload is regularly used to capacity, along with corrosion on the rear overhang and load doors. The brakes and the condition of the load floor, used daily in parcel and general freight transport, are also worth checking. The load securing points and the rear axle's shock absorbers are also worth checking, as these are under constant strain in regular parcel transport.
Sources: SpecCodex-Register: Kennwerte des Modells CRAFTER
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Width | 2,200 mmcorrect |
|---|---|
| Wheelbase | 4,490 mmcorrect |
| Unladen weight | 2,943 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 140 km/hcorrect |
Frequently asked questions
How much does the Furcar CRAFTER weigh?
The unladen weight is 2,943 kg.
What is the gross vehicle weight of the Furcar CRAFTER?
3,500 kg.
What engine does the Furcar CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
How fast does the Furcar CRAFTER go?
Top speed is 140 km/h.
When was the Furcar CRAFTER built?
Production years: 2022.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.