Fuldamobil Liefer S4
Built: 1959 · Series: Other models
More machines from model year 1959
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fuldamobil Liefer S4 – light delivery vehicle based on a microcar: 191cc two-cylinder two-stroke engine, 7.2kW, 300kg payload, 1,440mm width, model year 1959
Fuldamobil was a German microcar manufacturer based in Fulda that, from the early 1950s, built three- and four-wheeled minimal-class vehicles, also produced under licence in several other countries. The Liefer S4 is a delivery version of this microcar line.
Read on 3 more paragraphs
The two-cylinder two-stroke engine has a displacement of 191cc and produces 7.2kW; power is transmitted through a four-speed gearbox. With a gross vehicle weight of 600kg and an unladen weight of 300kg, a payload of 300kg remains, exactly half the gross vehicle weight. At 3,000mm long and 1,440mm wide, the Liefer S4 is a very small vehicle.
A two-cylinder two-stroke engine of 191cc producing 7.2kW was a typical, economical drivetrain solution for 1950s microcars. As a delivery version of a microcar, the Liefer S4 was intended for short courier runs and small quantities of goods in urban traffic, not for the regular distribution transport of heavier commercial vehicles.
When preserving or acquiring a Fuldamobil of this period, the condition of the two-stroke engine and its piston rings matters most, along with the weatherproofing of the plastic or sheet-metal body against damp. The brakes, steering and the availability of spare parts, which for this rare microcar can now only be found through microcar specialists, are also worth checking.
Sources: SpecCodex-Register: Kennwerte des Modells Liefer S4
Technical data
Engine
| Power | 7.2 kWcorrect |
|---|---|
| Cylinders | 2correct |
| Displacement | 191 cm³correct |
Dimensions and weights
| Length | 3,000 mmcorrect |
|---|---|
| Width | 1,440 mmcorrect |
| Unladen weight | 300 kgcorrect |
| Gross vehicle weight | 600 kgcorrect |
Drivetrain and chassis
| Gears | 4correct |
|---|
Where this model stands
Power-to-weight ratio: 24 kW/t (7 kW / 0.3 t)
Stronger than 0% of the vans in the register — out of 7,144 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fuldamobil Liefer S4 have?
The Fuldamobil Liefer S4 delivers 7.2 kW.
How much does the Fuldamobil Liefer S4 weigh?
The unladen weight is 300 kg.
What is the gross vehicle weight of the Fuldamobil Liefer S4?
600 kg.
What engine does the Fuldamobil Liefer S4 have?
2 cylinders, 191 cm³ displacement.
What are the dimensions of the Fuldamobil Liefer S4?
3,000 mm × 1,440 mm.
When was the Fuldamobil Liefer S4 built?
Production years: 1959.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
