Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Fuan Huachuang › Other models › MSE160M-4

Fuan Huachuang MSE160M-4

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fuan Huachuang MSE160M-4 is a three-phase induction motor from the Fuan Huachuang range. The rated output is 11 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 415 V. The housing is frame size 160 M in foot-mounted form. The protection class is IP55. The efficiency is 89 per cent at full load, 90.3 per cent at 75 per cent load and 90.4 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Fuan Huachuang range ranges from 4 to 11 kW; the MSE160M-4 sits at the top of that range with 11 kW. Its immediate neighbours are the MSE132M-4 below it with 7.5 kW. 4 Fuan Huachuang models are on record.

Fuan Huachuang – other models: the collective page of MEPS-registered three-phase motors from the Chinese works in Fujian outside the named ranges, frame sizes 112 to 160, 4 to 11 kW, four-pole, IP55

Fuan Huachuang is a motor works in China's Fujian province. This page gathers the three-phase motors from the maker that the Australian energy-efficiency register (GEMS/MEPS) does not assign to a named range. The four versions carry the designations MSE112M-4, MSE132S-4, MSE132M-4 and MSE160M-4, with the frame size given as a number and the pole count as the trailing digit of the designation.

Read on 3 more paragraphs

The register lists here four versions with 4 to 11 kW rated output, all four-pole and rated for 415 V. Full-load efficiency ranges from 85.44 to 89%, and at 75% load from 86.17 to 90.3%. Frame sizes range from 112 to 160, the protection class is IP55 throughout, and the mounting code is B3 throughout. Testing followed the Greenhouse and Energy Minimum Standards Determination 2019 with test method 2-1-1B.

With IP55 protection, the motors are shielded against dust and water jets and so also suit outdoor use or dusty industrial halls, for instance on conveyors, pumps or fans. The 4 to 11 kW power band covers the middle of the classic three-phase standard motor range.

On a used purchase, bearing condition, a tested winding insulation resistance, the seals at the terminal box and shaft lead-through, and a legible nameplate with frame size, pole count and protection class all count. Anyone wanting variable-speed operation should check inverter compatibility beforehand. Spare parts are available through general electric-motor suppliers.

Sources: SpecCodex register, model data: Fuan Huachuang (weitere Elektromotoren, MEPS-Registrierung)

Technical data

Engine

Rated output11 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size160 M (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load89 %correct
Efficiency at 75 % load90.3 %correct
Efficiency at half load90.37 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Fuan Huachuang MSE160M-4 have?

The Fuan Huachuang MSE160M-4 delivers 11 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare