Ford PICK UP/2630
Built: 1928 · Series: UP
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ford UP – the Dutch Pick-up registration class for Ford flatbed and load-bed trucks, from the F-100 and F-350 to V8 versions, 3.0 to 3.6 litres of displacement, four- to eight-cylinders, 1.2 to 2.7 tonnes unladen weight
Ford UP denotes the Dutch Pick-up registration class and gathers here Ford load-bed trucks of various generations that the register could not assign to a named range – from the F-100 through the one-and-a-half-ton F-1 1/2 Ton to the F-350 and plain entries as Pick-up or Pick-up V8. The type logic follows the classic F-Series payload class: the higher the number after the F, the greater the payload, with single rather than dual rear wheels on the lighter and a reinforced frame on the heavier versions.
Read on 3 more paragraphs
The register lists here 9 versions with 3.0 to 3.6 litres of displacement from four- to eight-cylinders, unladen weights from 1,180 to 2,716 kg, gross weights from 1,975 to 3,490 kg and widths from 1,670 to 2,050 mm.
Classic Ford pick-ups of this kind came to the Netherlands mainly as imported and used vehicles from North America, finding buyers among trades, agriculture and enthusiasts of American vehicles; the V8 versions stand for the more powerfully engined variants within the range.
On used examples, rust on frame, load bed and wings, the condition of carburettor and ignition on the older V8 engines, clutch and gearbox, and on US imports the availability of metric or imperial parts count; the parts trade for the F-Series is well established in Europe through specialist importers.
Sources: SpecCodex register, model data: Ford UP, Ford Motor Company (manufacturer), Zulassungsdaten RDW (Niederlande)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 3,290 cm³correct |
Dimensions and weights
| Width | 1,670 mmcorrect |
|---|---|
| Unladen weight | 1,180 kgcorrect |
Frequently asked questions
How much does the Ford PICK UP/2630 weigh?
The unladen weight is 1,180 kg.
What engine does the Ford PICK UP/2630 have?
4 cylinders, 3,290 cm³ displacement.
When was the Ford PICK UP/2630 built?
Production years: 1928.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PICK UP 1/2 TON
PICK UP C150
PICK UP F 100
PICK UP F1,1/2 TON
PICK UP F1.
PICK UP F350
PICK UP V8
Pick Up F100
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
