StartTrucks over 7.5 tFord › EXCURSION KRYSTAL

Ford EXCURSION KRYSTAL

Built: 2002-2002 · Series: EXCURSION

The photo shows the EXCURSION 4X4 LIMITED from the same series. Source: https://en.wikipedia.org/wiki/File:2004_Ford_Excursion_Limit

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EXCURSION KRYSTAL comes from Ford. Production: 2002. The engine delivers 229 kW, has 10 cylinders, with a displacement of 6,790 cm³. The machine is 8,750 mm long and 1,950 mm wide. The unladen weight is 3,990 kg. The gross vehicle weight is 5,715 kg. Rated output across the Ford range ranges from 7 to 504 kW; the EXCURSION KRYSTAL sits in the middle of that range with 229 kW. Its immediate neighbours are the EXCURSION 6.8L V10 4x4 below it with 228 kW and the Expedition EL above it with 230 kW. 4082 Ford models across 50 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Technical data

Engine

Power229 kWcorrect
Cylinders10correct
Displacement6,790 cm³correct

Dimensions and weights

Length8,750 mmcorrect
Width1,950 mmcorrect
Unladen weight3,990 kgcorrect
Gross vehicle weight5,715 kgcorrect

Where this model stands

Power-to-weight ratio: 57.4 kW/t (229 kW / 4 t)

Stronger than 39% of the trucks over 7.5 t in the register — out of 27,962 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford EXCURSION KRYSTAL have?

The Ford EXCURSION KRYSTAL delivers 229 kW.

How much does the Ford EXCURSION KRYSTAL weigh?

The unladen weight is 3,990 kg.

What is the gross vehicle weight of the Ford EXCURSION KRYSTAL?

5,715 kg.

What engine does the Ford EXCURSION KRYSTAL have?

10 cylinders, 6,790 cm³ displacement.

What are the dimensions of the Ford EXCURSION KRYSTAL?

8,750 mm × 1,950 mm.

When was the Ford EXCURSION KRYSTAL built?

Production years: 2002.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare