Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ford › Other models › 8730 4WD

Ford 8730 4WD

Built: 1991 · Series: Other models

More machines from model year 1991

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ford 8730 4WD is a machine built by Ford. Production: 1991. The engine delivers 113 kW, with a displacement of 6,570 cm³. The machine is 5,000 mm long. The unladen weight is 7,200 kg. The gross vehicle weight is 11,400 kg. Rated output across the Ford range ranges from 7 to 504 kW; the 8730 4WD sits in the lower part of that range with 113 kW. Its immediate neighbours are the LTD COUNTRY SQUIRE STW-BP79F below it with 112 kW and the F-8-159 above it with 114 kW. Unladen weight across the Ford range ranges from 710 to 23,550 kg; here the 8730 4WD sits in the lower part of that range with 7,200 kg. 5516 Ford models across 101 series are on record.

Ford – other models: the collective page of tractors outside the named ranges, from the Thousand series through the 10 series to the articulated tractors with Cummins and Caterpillar engines, 10 to 300 kW

This page gathers the Ford tractors the register could not assign to a named range – from small utility tractors of the North American and British plants to the heavy articulated tractors of the Versatile brand, taken over by Ford in the late 1980s. Ford had built farm tractors since 1917, first in Dearborn, from the 1930s also in Dagenham, England; the post-war 600 to 900 models led in 1965 into the Thousand series (2000, 3000, 4000, 5000), replaced in 1975 by the generation with a leading 0. From 1981 came the 10 series (2110 to 8210), in which the first two digits give the size and the last the generation; SU marks the narrow-track Utility version. The big articulated tractors, formerly built under the Versatile name in Winnipeg, ran from 1987 as the Ford FW with Cummins and Caterpillar engines; after the merger with New Holland in 1991 the independent Ford range ended.

Read on 3 more paragraphs

The register lists here 237 versions with 9.7 to 300 kW from two- to eight-cylinders of 1,390 to 14,801 cm³, PTO outputs up to 163 hp, unladen weights from 1,061 to 14,200 kg, gross weights from 2,280 to 11,400 kg, lengths from 2,410 to 7,600 mm and widths from 1,070 to 2,845 mm; the engines are mostly Ford's own, Cummins and Caterpillar in the big articulated tractors.

For decades Ford was, alongside International Harvester, Massey Ferguson and John Deere, one of the best-selling tractor brands of North America and Europe, focused on utility tractors for family farms; the FW-range articulated tractors competed in the top power segment with Steiger and Case IH.

On used tractors, engine condition, clutch and gearbox synchros count on the older ranges, hydraulics and electrics on the 10 series, and on the articulated tractors operating hours, condition of the four-wheel drive and tyres, and parts supply for the Cummins or Caterpillar engines, which today runs outside the Ford network.

Sources: SpecCodex register, model data: Ford (weitere Modelle), New Holland (Rechtsnachfolger von Ford New Holland)

Technical data

Engine

Power113 kWcorrect
Displacement6,570 cm³correct

Dimensions and weights

Length5,000 mmcorrect
Unladen weight7,200 kgcorrect
Gross vehicle weight11,400 kgcorrect

Where this model stands

Power-to-weight ratio: 15.7 kW/t (113 kW / 7.2 t)

Power class: Large (100–180 hp)

Stronger than 84% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford 8730 4WD have?

The Ford 8730 4WD delivers 113 kW.

How much does the Ford 8730 4WD weigh?

The unladen weight is 7,200 kg.

What is the gross vehicle weight of the Ford 8730 4WD?

11,400 kg.

What engine does the Ford 8730 4WD have?

6,570 cm³ displacement.

When was the Ford 8730 4WD built?

Production years: 1991.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare