Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Ford › 0813-DC2CAL

Ford 0813-DC2CAL

Built: 1989 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ford 0813-DC2CAL belongs to the Trucks 3.5–12 t (Class N2) series. Production: 1989. The engine delivers 94 kW, has 6 cylinders, with a displacement of 6,220 cm³. The machine is 7,270 mm long and 2,500 mm wide. The unladen weight is 4,160 kg. The gross vehicle weight is 7,500 kg. The gearbox offers 6 gears. The Trucks 3.5–12 t (Class N2) series covers 324 models. Rated output within it ranges from 48 to 475 kW; the 0813-DC2CAL sits at the bottom of that range with 94 kW. Its immediate neighbours are the 350L below it with 92 kW and the 135 T350 above it with 101 kW. Unladen weight within it ranges from 2,036 to 8,975 kg; here the 0813-DC2CAL sits in the lower part of that range with 4,160 kg. 5516 Ford models across 101 series are on record.

Ford Super Duty — where the heavy range begins: from the entry-level F-250 to the F-750, with the 6.7-litre Power Stroke diesel as the range's defining engine

Super Duty is not a trim line but a range of its own: Ford introduced it in 1998 for the 1999 model year, covering commercial trucks above 8,500 lb gross vehicle weight — around 3,900 kilograms. Everything below stays with the F-150 and its relatives.

Read on 4 more paragraphs

The number gives the class, not the size of the engine. The F-250 marks the entry to the range and is also its volume leader: for buyers needing more than a half-ton but not the dual rear wheels or higher ratings of an F-350 or F-450. Upwards the range runs to the F-750.

Manufacturing separates the classes too. The F-250 through F-550 are assembled at the Kentucky Truck Plant in Louisville; the heavy F-650 and F-750 at the Blue Diamond plant in Mexico. Comparing two vehicles, do not assume an F-750 is simply a larger F-250 — these are different vehicle concepts under one name.

The engine that defines the range is the 6.7-litre Power Stroke diesel. In standard form it produces 475 hp and 1,050 lb-ft of torque; the High-Output version 500 hp and 1,200 lb-ft. For payload context: an F-150 tops out near 2,440 lb, an F-250 carries more than 4,200 lb.

Under European registration logic, vehicles of this gross weight (3,502 to 11,990 kg) fall into class N2 (3.5 to 12 t); their commercial use requires, depending on weight, a category C1 or C driving licence, plus a tachograph, driving and rest times and, in many European countries, a distance-based toll. As straight pick-ups and cab-chassis without a fifth-wheel coupling, they remain rigid vehicles, not tractor units.

Sources: SpecCodex register, model data: Ford Lkw Klasse N2

Technical data

Engine

Power94 kWcorrect
Cylinders6correct
Displacement6,220 cm³correct

Dimensions and weights

Length7,270 mmcorrect
Width2,500 mmcorrect
Unladen weight4,160 kgcorrect
Gross vehicle weight7,500 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 22.6 kW/t (94 kW / 4.2 t)

Stronger than 5% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford 0813-DC2CAL have?

The Ford 0813-DC2CAL delivers 94 kW.

How much does the Ford 0813-DC2CAL weigh?

The unladen weight is 4,160 kg.

What is the gross vehicle weight of the Ford 0813-DC2CAL?

7,500 kg.

What engine does the Ford 0813-DC2CAL have?

6 cylinders, 6,220 cm³ displacement.

What are the dimensions of the Ford 0813-DC2CAL?

7,270 mm × 2,500 mm.

When was the Ford 0813-DC2CAL built?

Production years: 1989.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare