Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ford New Holland › 30-Serie › 8630

Ford New Holland 8630

Built: 1989–1994 · Series: 30-Serie

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ford New Holland 8630 belongs to the 30 series. Production: 1989–1994. The engine delivers 132 hp (97.1 kW), has 6 cylinders, with a displacement of 6,572 cm³. Torque is 471 Nm. Rated speed is 2,200 rpm. The machine is 5,243 mm long, 2,123 mm wide and 3,065 mm high. The unladen weight is 8,346 kg. The wheelbase measures 2,667 mm. Ground clearance is 394 mm. Top speed is 30 km/h. Transmission: 18 V/9 R or 16 V/4 R. The engine is water-cooled. Tyres: front 14.9-28 AS, rear 18.4 R 38 AS. The fuel is diesel. The bore measures 111.78 mm. The stroke is 111.78 mm. The compression ratio is 15.6:1. Maximum torque is reached at 1,500 rpm. Construction: unit construction (no separate frame). The 30-Serie series covers 3 models. Rated output within it ranges from 45 to 186 hp; the 8630 sits in the upper part of that range with 132 hp. Its immediate neighbours are the 3430 below it with 45 hp and the 8830 above it with 186 hp. Unladen weight within it ranges from 2,742 to 8,346 kg; here the 8630 sits at the top of that range with 8,346 kg. 21 Ford New Holland models across 5 series are on record.

Ford New Holland 30 range – from the 3430 to the 8830 from Basildon: three- to six-cylinder diesel with 31 to 137 kW, up to 8.3 tonnes weight

After Ford took over New Holland in 1986, the agricultural machinery division traded for several years as Ford New Holland, with production including the plant at Basildon in England. The 30 range succeeded the earlier 10 range in the early 1990s. This page covers the three versions 3430, 8630 and 8830, spanning from a compact all-purpose tractor to a powerful large tractor.

Read on 3 more paragraphs

The register lists 3 versions here with 31.1 to 136.8 kW rated output from three- to six-cylinder diesel engines of 3,141 to 6,582 cc displacement. Kerb weight ranges from 2,742 to 8,346 kg, length from 3,525 to 5,243 mm, width from 1,771 to 2,665 mm and height from 2,451 to 3,065 mm. Maximum torque ranges from 170 to 471 Nm at rated speeds of 1,970 to 2,200 rpm.

The wide span from the compact 3430 to the heavy 8830 shows the breadth of the Ford New Holland 30 range, which covered everything from the smaller family farm to the large arable enterprise. In this decade, the range competed with the comparable series from John Deere, Case IH and Massey Ferguson for market share in the European and American agricultural machinery markets.

When buying a used model from the 30 range, check, depending on size, the condition of the injection pump and turbocharger, wear on the clutch and gearbox, and on the larger models the four-wheel drive and brakes. Spare parts for this range are available through the New Holland dealer network, which continues to support the technical succession of Ford New Holland today.

Sources: SpecCodex register, model data: Ford New Holland 30-Serie, New Holland (Nachfolgemarke)

Technical data

Engine

Fueldieselcorrect
Power132 hp (97.1 kW)correct
Rated speed2,200 rpmcorrect
Torque471 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement6,572 cm³correct
Bore111.78 mmcorrect
Stroke111.78 mmcorrect
Compression ratio15.6correct
Coolingwater-cooledcorrect

Dimensions and weights

Length5,243 mmcorrect
Width2,123 mmcorrect
Height3,065 mmcorrect
Wheelbase2,667 mmcorrect
Ground clearance394 mmcorrect
Unladen weight8,346 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox18 V/9 R or 16 V/4 Rcorrect
Front tyres14.9-28 AScorrect
Rear tyres18.4 R 38 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 11.6 kW/t (97 kW / 8.3 t)

Power class: Large (100–180 hp)

Stronger than 78% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford New Holland 8630 have?

The Ford New Holland 8630 delivers 132 hp.

How much does the Ford New Holland 8630 weigh?

The unladen weight is 8,346 kg.

What engine does the Ford New Holland 8630 have?

6 cylinders, 6,572 cm³ displacement, Diesel.

How fast does the Ford New Holland 8630 go?

Top speed is 30 km/h.

What are the dimensions of the Ford New Holland 8630?

5,243 mm × 2,123 mm × 3,065 mm.

When was the Ford New Holland 8630 built?

Production years: 1989–1994.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare