Fliegl SDS 480
Built: 2007 · Series: SDS
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fliegl SDS – extendable low-loaders for long goods and construction machinery, 3.1 to 11.8 t kerb weight, up to 48 t gross vehicle weight, lengths up to 19 m
This page gathers Fliegl trailers of the SDS range. Fliegl, a Bavarian manufacturer of commercial trailers and semi-trailers, runs the SDS range as a programme of extendable low-loaders for long and heavy loads such as steel girders or construction machinery. Model numbers from 340 to 480 rise with the load capacity of the respective version, supplemented by the addition Vario for versions with a variable axle or frame configuration.
Read on 3 more paragraphs
The register lists here 34 versions with kerb weights from 3,120 to 11,800 kg and gross vehicle weights from 27,000 to 48,000 kg, at lengths from 7,820 to 19,180 mm and widths from 2,450 to 2,600 mm.
With frames extending to almost 19 metres, the SDS range belongs to the specialised transport of long goods, used for hauling steel, pipes and construction machinery alongside makers such as Faymonville and Broshuis. Compared with a classic semi-trailer, the extendable design lets a single vehicle carry loads of varying length, which adds flexibility especially in steel trading and construction-machinery rental.
When buying used, check the frame and extension mechanism for wear and smooth operation, the function of the locking and outrigger supports, the brake system and axles, and the condition of the signal and lighting system over the full length. On the Vario versions also check the smooth operation of the adjustment mechanism in the mid-frame section and the condition of the plug-in axles and pin connections; spares are supplied through Fliegl's own factory service.
Sources: SpecCodex register, model data: Fliegl SDS, Fliegl (manufacturer)
Technical data
Dimensions and weights
| Length | 13,800 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 10,000 mmcorrect |
| Unladen weight | 10,900 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Fliegl SDS 480 weigh?
The unladen weight is 10,900 kg.
What is the gross vehicle weight of the Fliegl SDS 480?
45,000 kg.
Up to what speed is the Fliegl SDS 480 approved?
Approved up to 100 km/h.
What are the dimensions of the Fliegl SDS 480?
13,800 mm × 2,550 mm.
When was the Fliegl SDS 480 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SDS
SDS 340
SDS 350
SDS 350 J
SDS 350 RH 145/248
SDS 360
SDS 380
SDS 380 VARIO
SDS 380/665+132+141
SDS 390 X-TRA SHORT
SDS 390V
SDS 400
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.