Flaman CK25HST Utility
Series: Pozostałe modele
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Flaman CK25HST is a tractor from the Flaman Utility Tractor series. The engine draws 25 hp (18.6 kW) from 1.3 litres. With a rated speed of 2,800 rpm, it is built for pulling power, not for revving.
At 21 km/h, that is as fast as it goes. Width is 1.39 m. Wheelbase is 1.68 m.
Within the range, rated power spans from 19.3 to 54.7 hp; with 25.3 hp, the CK25HST sits in the lower third. Directly alongside are the CK20HST with 22.3 hp below and the LK30(TLB) with 28.4 hp above.
Technical data
Engine
| Engine model | TD1300LXAcorrect |
|---|---|
| Power | 25.3 hp (18.6 kW)correct |
| Rated speed | 2,800 rpmcorrect |
| Displacement | 1,301.1 cm³correct |
| Aspiration | naturalcorrect |
Dimensions and weights
| Width | 1,389.9correct |
|---|---|
| Wheelbase | 1,682.5correct |
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|---|
| Top speed | 21.2 km/hcorrect |
Working data
| Pump flow | 48.1 l/mincorrect |
|---|---|
| Fuel tank capacity | 30.3 lcorrect |
Frequently asked questions
How much power does the Flaman CK25HST have?
The Flaman CK25HST delivers 25.3 hp.
What engine does the Flaman CK25HST have?
1,301 cm³ displacement.
How fast does the Flaman CK25HST go?
Top speed is 21.2 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.