Fiat TRIGANO FI 1
Built: 2003-2005 · Series: TRIGANO
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Trigano – a motorhome body by the French builder Trigano on the Ducato chassis: a 2.8-litre diesel, unladen weight 2,730 to 3,020 kg, gross weight up to 3,500 kg, width up to 2,550 mm
Trigano is a French manufacturer of caravans and motorhomes, building its vehicles on the Fiat Ducato chassis, the standard base across this class throughout Europe. The F11, FI1 and FK1 designations in the model names are the builder's own range and length codes for the bodies.
Read on 3 more paragraphs
The register lists 6 versions with a constant 2,800 cm³ four-cylinder diesel, unladen weights from 2,730 to 3,020 kg and gross weights from 3,400 to 3,500 kg. Width runs from 2,260 to 2,550 mm, reaching the maximum vehicle width permitted in the EU.
As part of the wide field of French and European motorhome converters, the wider Trigano bodies target buyers who value living comfort and space while travelling.
On a used example, besides the usual diesel service points of the Ducato chassis, checking for damp at the roof and window seals and the body floor matters. Since the gap between unladen and gross weight on these vehicles can be only a few hundred kilograms, the actual payload margin for water, gas and luggage is worth checking before purchase. Chassis parts run through the Fiat network, body and fitting parts through motorhome specialists. Because the living module comes from a specialist builder rather than a mass manufacturer, interior fitting parts are worth ordering ahead of time, before a repair becomes urgent.
Sources: SpecCodex register, model data: Fiat Trigano, Trigano (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,800 cm³correct |
Dimensions and weights
| Width | 2,300 mmcorrect |
|---|---|
| Wheelbase | 3,720 mmcorrect |
| Unladen weight | 3,020 kgcorrect |
| Gross vehicle weight | 3,490 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat TRIGANO FI 1 weigh?
The unladen weight is 3,020 kg.
What is the gross vehicle weight of the Fiat TRIGANO FI 1?
3,490 kg.
What engine does the Fiat TRIGANO FI 1 have?
4 cylinders, 2,800 cm³ displacement.
When was the Fiat TRIGANO FI 1 built?
Production years: 2003-2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
