Fiat PANDA ELETTRA
Built: 1992-1996 · Series: PANDA
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Panda – the van versions of the small car registered as commercial vehicles, from the Panda 750 through the electric Elettra to the four-wheel-drive 4x4, 49.5 to 51 kW, 770 to 1,368 cc, 600 to 1
This page gathers the versions of the Fiat Panda registered as commercial vehicles, from the early Panda 750 through the electric Elettra to the four-wheel-drive 4x4. The Panda arrived in 1980 to a design by Giorgetto Giugiaro (Italdesign) and from the start was available, alongside the passenger version, as a two-seat van with the rear seat removed and the load area panelled in – a commercial-vehicle concept on a small-car base widespread in Italy and Spain. The Panda 4x4 of 1983 used a four-wheel-drive system developed jointly with the Austrian Steyr-Daimler-Puch group, and the Elettra was created in the early 1990s as an electric version for inner-city use.
Read on 3 more paragraphs
The register lists here 7 versions with about 49.5 to 51 kW from four-cylinders of 770 to 1,368 cc, unladen weights from 600 to 1,150 kg, gross weights from 1,150 to 1,520 kg, lengths from 3,410 to 3,653 mm and widths from 1,420 to 1,640 mm.
The Panda was for decades one of Italy's best-selling small cars, and the van version served small trade businesses and inner-city delivery work, where agility and low consumption mattered more than load volume; the 4x4 additionally opened up rural and alpine users looking for a compact, four-wheel-drive small car.
On used examples, rust on the sills, floor pan and wheel arches, the condition of the clutch and carburettor or injection depending on the engine variant, and on the 4x4 the rear-axle engagement and transfer case all count; parts are well available through the Fiat network and the Panda's broad fan community.
Sources: SpecCodex register, model data: Fiat Panda, Fiat (Stellantis, Hersteller)
Technical data
Dimensions and weights
| Width | 1,490 mmcorrect |
|---|---|
| Wheelbase | 2,160 mmcorrect |
| Unladen weight | 1,140 kgcorrect |
| Gross vehicle weight | 1,440 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat PANDA ELETTRA weigh?
The unladen weight is 1,140 kg.
What is the gross vehicle weight of the Fiat PANDA ELETTRA?
1,440 kg.
When was the Fiat PANDA ELETTRA built?
Production years: 1992-1996.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.