Fiat MULTIPLA 1.9 JTD VAN
Built: 2000-2006 · Series: MULTIPLA
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Multipla as a van-register entry: six-seat MPV with a JTD common-rail diesel and a Bi Power petrol engine, 77 to 86.5 kW, panel-van version, gross weight up to 2,050 kg
The Multipla is Fiat's MPV with its distinctive twin-tier body and unusual 3+3 seating layout, built from 1998 to 2010. JTD denotes Fiat's common-rail diesel technology introduced in 1997, one of the first of its kind in the volume segment; “Bi Power” denotes a bi-fuel petrol/LPG version. Alongside the passenger version there was a panel-van version registered with the rear side windows blanked out for load carrying.
Read on 3 more paragraphs
The register lists 6 versions with 77 to 86.5 kW from four-cylinders of 1,596 to 1,910 cm³, unladen weights from 1,239 to 1,409 kg and gross weights from 1,809 to 2,050 kg. Length runs from 3,990 to 4,039 mm, width is a constant 1,870 mm.
With its unconventional design the Multipla remained a niche model, but scored with an unusually large interior on a short body; the panel-van version used that space for trades and small delivery services.
On a used JTD example, the condition of the injectors and high-pressure pump matters, along with the timing belt, whose change interval must be kept as the engine is an interference design. Central locking and electric windows are known to be fault-prone, and rust mainly affects the sills. Parts run through the regular Fiat network, though model-specific interior trim is scarcer. Given the Multipla's relatively low production numbers compared with mainstream vans, sourcing body-specific trim can take longer than for the JTD engine's regular wear parts.
Sources: SpecCodex register, model data: Fiat Multipla, Fiat (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,910 cm³correct |
Dimensions and weights
| Width | 1,870 mmcorrect |
|---|---|
| Wheelbase | 2,670 mmcorrect |
| Unladen weight | 1,309 kgcorrect |
| Gross vehicle weight | 2,050 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat MULTIPLA 1.9 JTD VAN weigh?
The unladen weight is 1,309 kg.
What is the gross vehicle weight of the Fiat MULTIPLA 1.9 JTD VAN?
2,050 kg.
What engine does the Fiat MULTIPLA 1.9 JTD VAN have?
4 cylinders, 1,910 cm³ displacement.
When was the Fiat MULTIPLA 1.9 JTD VAN built?
Production years: 2000-2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
5D MULTIPLA JTD105-186AXB1A01
MULTIPLA
MULTIPLA 1.6 16V BI POWER VAN
MULTIPLA 1.6 16V VAN
MULTIPLA 1.9 JTD VAN 500
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
