Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Fiat › Other models › MD-38 XA

Fiat MD-38 XA

Built: 1996 · Series: Other models

More machines from model year 1996

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fiat MD-38 XA is a vehicle built by Fiat. Production: 1996. The engine has 4 cylinders. The vehicle is 7,120 mm long and 2,300 mm wide. The unladen weight is 3,430 kg. The wheelbase measures 4,020 mm. The gross vehicle weight is 3,850 kg. The vehicle runs on 4 wheels. Unladen weight across the Fiat range ranges from 525 to 12,516 kg; the MD-38 XA sits in the lower part of that range with 3,430 kg. Its immediate neighbours are the DUCATO 18 KAMPEERAUTO below it with 3,420 kg and the HYMER TYPE 690 above it with 3,440 kg. Gross vehicle weight across the Fiat range ranges from 850 to 25,200 kg; here the MD-38 XA sits at the bottom of that range with 3,850 kg. 2638 Fiat models across 43 series are on record.

Fiat – other models: trucks and the Ducato motorhome base before Iveco was founded in 1975, from the 130 NC and 170 NT to Hymer and Borco-Höhns conversions, 60 to 132 kW, four- to eight-cylinders of 2.2 to 17.2 litres

This page gathers the Fiat trucks the register could not assign to a named range – from classic construction and long-haul trucks such as the 130 NC and 170 NT through light ranges such as the 50 NC to numerous motorhome and van conversions on the Ducato base, built by body converters such as Hymer and Borco-Höhns. Fiat built commercial vehicles in Turin from the early 1900s and in 1975 merged its heavy truck ranges together with OM, Lancia Veicoli Speciali, France's Unic and Germany's Magirus-Deutz into the newly founded Iveco; type codes such as NC (Nuova Cabina) or the number combinations before the dot usually denoted the power class, but a consistent system across all the model years gathered here can no longer be read through reliably.

Read on 3 more paragraphs

The register lists here 112 versions with 60 to 132 kW from four- to eight-cylinders of 2,184 to 17,174 cm³, unladen weights from 1,630 to 12,516 kg, gross weights from 3,495 to 25,200 kg, lengths from 5,380 to 9,700 mm and widths from 1,870 to 2,550 mm.

The span from light van chassis to heavy construction trucks shows how broad Fiat's commercial-vehicle programme was before the founding of Iveco; the Ducato motorhome base lives on today as the best-selling chassis among European motorhome makers, while the heavy ranges were absorbed into the Iveco type ranges.

On the classic truck chassis, what counts is the rust condition of frame and cab, engine and clutch condition, and parts availability through the Fiat and Iveco networks; on the Ducato-based motorhomes, additionally the condition of the body, dampness inside, and the service history of the particular motorhome maker.

Sources: SpecCodex register, model data: Fiat (weitere Modelle), Iveco (Nachfolgeunternehmen der Fiat-Lkw-Sparte)

Technical data

Engine

Cylinders4correct

Dimensions and weights

Length7,120 mmcorrect
Width2,300 mmcorrect
Wheelbase4,020 mmcorrect
Unladen weight3,430 kgcorrect
Gross vehicle weight3,850 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Fiat MD-38 XA weigh?

The unladen weight is 3,430 kg.

What is the gross vehicle weight of the Fiat MD-38 XA?

3,850 kg.

What engine does the Fiat MD-38 XA have?

4 cylinders.

What are the dimensions of the Fiat MD-38 XA?

7,120 mm × 2,300 mm.

When was the Fiat MD-38 XA built?

Production years: 1996.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare