Fiat/plandex DUCATO
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat/Plandex – other models: the collective page of chassis with independent bodywork on the Fiat Ducato base, four-cylinder engine of 2.2 to 2.3 litres, gross weight 3,500 kg
This page gathers models under the register designation Fiat/Plandex, which marks chassis fitted with bodywork by an independent coachbuilder. Both versions listed here are based on the Fiat Ducato, one under the designation Ducato/Z, denoting a particular body variant from this coachbuilder's own range.
Read on 3 more paragraphs
The register lists 2 versions here with displacement from 2,184 to 2,287 cm³ from four-cylinder engines, kerb weights from 2,460 to 2,705 kg, a uniform gross vehicle weight of 3,500 kg, a length of 7,050 mm and widths from 2,170 to 2,180 mm.
Independent bodywork on the Ducato chassis is common among coachbuilding firms that turn them into box, refrigerated or mobile workshop bodies for regional distribution transport; the gross weight of 3,500 kg keeps both versions within the category B driving licence, allowing them to be used without additional entitlements.
For a used example, check the condition and mounting of the body to the chassis, the tightness of the roof and side panels, the condition of the clutch and brake system, and corrosion on the chassis and wheel arches given the considerable body length; also check the frame for twist, the rear tie-down points and the door seals. Drivetrain parts run through the Fiat dealer network, and body parts through the coachbuilder.
Sources: SpecCodex register, model data: Fiat/Plandex (weitere Modelle), Fiat (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,184 cm³correct |
Dimensions and weights
| Length | 7,050 mmcorrect |
|---|---|
| Width | 2,180 mmcorrect |
| Wheelbase | 4,040 mmcorrect |
| Unladen weight | 2,705 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat/plandex DUCATO weigh?
The unladen weight is 2,705 kg.
What is the gross vehicle weight of the Fiat/plandex DUCATO?
3,500 kg.
What engine does the Fiat/plandex DUCATO have?
4 cylinders, 2,184 cm³ displacement.
What are the dimensions of the Fiat/plandex DUCATO?
7,050 mm × 2,180 mm.
When was the Fiat/plandex DUCATO built?
Production years: 2022.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
