Fiat/digicross DUCATO/DG
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Ducato/Digicross – chassis with light body: 2.3-litre four-cylinder diesel, 1,410kg payload, 4,040mm wheelbase, 2,110mm width, model year 2019
This vehicle is also based on the Fiat Ducato, the light commercial vehicle built since 1981 that serves as a panel van and as a chassis for a wide range of bodies. This entry describes a chassis of this range fitted with a body marked Digicross. Fiat has built the Ducato since 1981, and the current, third generation of this chassis (type 250) has been produced since 2006 with numerous technical updates along the way.
Read on 3 more paragraphs
The four-cylinder diesel engine has a displacement of 2,287cc. With a gross vehicle weight of 3,500kg and an unladen weight of 2,090kg, a payload of 1,410kg remains, a high figure for a vehicle in this weight class. The wheelbase is 4,040mm, the width 2,110mm.
A payload of 1,410kg against an unladen weight of only 2,090kg points to a comparatively light body that leaves a large share of the 3,500kg gross vehicle weight limit free for cargo. The vehicle falls under EU category N1 and can be driven on a category B licence as long as 3,500kg is not exceeded.
When buying used, the usual Ducato chassis points apply – timing belt, brakes, corrosion on the floor pan and wheel arches – along with the mounting and weatherproofing of the light body, whose material and build quality can age faster than the sturdier box body of the base vehicle. Spare parts for the chassis itself are readily available, while parts for the body are available only to a limited extent. With a light body, it is also worth assessing the hinges and locks on the load doors, which tend to work loose faster on thinner side panels.
Sources: SpecCodex-Register: Kennwerte des Modells FIAT DUCATO/DG
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Width | 2,110 mmcorrect |
|---|---|
| Wheelbase | 4,040 mmcorrect |
| Unladen weight | 2,090 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat/digicross DUCATO/DG weigh?
The unladen weight is 2,090 kg.
What is the gross vehicle weight of the Fiat/digicross DUCATO/DG?
3,500 kg.
What engine does the Fiat/digicross DUCATO/DG have?
4 cylinders, 2,287 cm³ displacement.
When was the Fiat/digicross DUCATO/DG built?
Production years: 2019.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
