Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ferrari › Cobram › COBRAM F50 REV

Ferrari COBRAM F50 REV

Built: 2008 · Series: Cobram

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ferrari COBRAM F50 REV is a model in the Cobram series. Production: 2008. The engine delivers 35.3 kW, has 4 cylinders, with a displacement of 2,199 cm³. The machine is 2,806 mm long and 1,010 mm wide. The unladen weight is 1,310 kg. The gross vehicle weight is 2,000 kg. The gearbox offers 8 gears. The Cobram series covers 9 models. Rated output within it ranges from 26 to 41.2 kW; the COBRAM F50 REV sits in the upper part of that range with 35.3 kW. Its immediate neighbours are the Cobram 50 AR below it with 34 kW and the Cobram 60 AR above it with 36.4 kW. Unladen weight within it ranges from 1,310 to 1,670 kg; here the COBRAM F50 REV sits at the bottom of that range with 1,310 kg. 42 Ferrari models across 3 series are on record.

Ferrari Cobram 40 to V65 – the equal-wheel specialist tractor from Luzzara: AR for articulated, RS for wheel steering, REV for reversible seat, the number as hp class, Lombardini and VM diesels of 2.2 to 2.5 litres

Ferrari of Luzzara near Reggio Emilia – not the sports-car maker but the tractor manufacturer founded in 1954, since the 1990s part of the BCS group of Abbiategrasso – specialises in equal-wheel tractors: machines with four equal wheels, low centre of gravity and narrow track for vineyard, orchard, greenhouse and slope. The Cobram is the middle range of that programme; the type logic: the number gives the hp class – Cobram 40 about 40 hp, 50 50 hp, 65 65 hp – AR the articulated version (articolato), in which the tractor bends in the middle and the wheels stay in track, RS the version with steered wheels (ruote sterzanti) and rigid frame, REV the reversible seat with which the driver works facing the implement, V an upgrade variant. The engines come from Lombardini and VM of Cento, three- and four-cylinder diesels of 2.2 to 2.5 litres.

Read on 3 more paragraphs

The register lists 9 versions with 26 to 41.2 kW from engines of 2,199 to 2,482 cm³, unladen weights from 1,310 to 1,670 kg, gross weights from 2,000 to 2,300 kg, lengths from 2,806 to 3,270 mm and widths from 1,010 to 1,667 mm.

Equal-wheel articulated tractors are an Italian speciality – Ferrari, Pasquali, Goldoni, Antonio Carraro and Valpadana build them – common in Germany and Austria in steep-slope viticulture and municipal service.

On used tractors, operating hours, play in the articulation joint (AR) and in the steering (RS), clutch and shuttle, the condition of PTO and hydraulics and parts supply through BCS dealers and the engine makers are what count.

Sources: SpecCodex register, model data: Ferrari Cobram, Ferrari (BCS Group, Hersteller)

Technical data

Engine

Power35.3 kWcorrect
Cylinders4correct
Displacement2,199 cm³correct

Dimensions and weights

Length2,806 mmcorrect
Width1,010 mmcorrect
Unladen weight1,310 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 26.9 kW/t (35 kW / 1.3 t)

Power class: Universal (40–100 hp)

Stronger than 32% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ferrari COBRAM F50 REV have?

The Ferrari COBRAM F50 REV delivers 35.3 kW.

How much does the Ferrari COBRAM F50 REV weigh?

The unladen weight is 1,310 kg.

What is the gross vehicle weight of the Ferrari COBRAM F50 REV?

2,000 kg.

What engine does the Ferrari COBRAM F50 REV have?

4 cylinders, 2,199 cm³ displacement.

What are the dimensions of the Ferrari COBRAM F50 REV?

2,806 mm × 1,010 mm.

When was the Ferrari COBRAM F50 REV built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare