Fendt IDEAL 7 – specifications
Series: Fendt Combine
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt combines – the IDEAL 7, IDEAL 8 and IDEAL 9 with engines from AGCO Power and MAN, 9,801.1 to 15,200.6 cm³ displacement
This page gathers the IDEAL combine range from Fendt, the AGCO brand based in Marktoberdorf. Fendt has been part of the US AGCO group since 1997 and brings together tractors and the IDEAL combines under the Fendt brand for the European and international market. The IDEAL range is built in Hohenmölsen and comprises the IDEAL 7, IDEAL 8 and IDEAL 9 tiers, with the rising number marking throughput capacity and engine output.
Read on 3 more paragraphs
The register lists here 3 versions with engines from AGCO Power and MAN, with displacements from 9,801.1 to 15,200.6 cm³ and speeds of 1,900 rpm.
Combines in this range rank among the largest models in the market for grain, maize and oilseed-rape harvesting, where Fendt competes with its IDEAL rotor system against the established ranges from Claas, John Deere and Case IH; the IDEAL 9 as the flagship model marks the top power class of the range. The three-tier model range lets farmers and contractors match machine size to farm size and harvest volume without switching brands. Fendt competes here chiefly on cab finish quality and threshing-drum automation.
On used examples, operating hours and the condition of the engine, wear on the rotor and concaves, the condition of the header and chopper, and hydraulic tightness all matter; spare parts and servicing run through the Fendt dealer network.
Sources: SpecCodex register, model data: Fendt Combine, Fendt (manufacturer)
Technical data
Engine
| Engine model | AGCO Powercorrect |
|---|---|
| Rated speed | 1,900 rpmcorrect |
| Displacement | 9,801.1 cm³correct |
Drivetrain and chassis
| Gearbox type | 2 Speed Motion Shiftcorrect |
|---|---|
| Top speed | 40.2 km/hcorrect |
Frequently asked questions
What engine does the Fendt IDEAL 7 have?
9,801 cm³ displacement.
How fast does the Fendt IDEAL 7 go?
Top speed is 40.2 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · lectura-specs.com (retrieved August 2026) · Data sources and cross-checks
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.
