Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Favorit (600 LS) › Favorit 600 LS

Fendt Favorit 600 LS

Built: 1978–1981 · Series: Favorit (600 LS)

More machines from model year 1978

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Favorit (600 LS) series from Fendt includes the Favorit 600 LS. Production: 1978–1981. The engine delivers 85 hp (62.2 kW), has 6 cylinders, with a displacement of 5,652 cm³. Torque is 324 Nm. Rated speed is 2,300 rpm. The machine is 4,684 mm long, 2,204 mm wide and 2,809 mm high. The unladen weight is 4,775 kg. The wheelbase measures 2,783 mm. Ground clearance is 430 mm. Top speed is 30 km/h. The tank holds 222 litres. The engine is water-cooled. Tyres: front 7.50-20 ( A: 11.2/10-28 ), rear 16.9/14-38 ( A: 18.4/15-34 ). The fuel is diesel. Construction: frameless unit construction. The linkage is category III. The PTO runs at 540/1000 rpm. Around 1631 units were built. The Favorit (600 LS) series covers 5 models. Rated output within it ranges from 85 to 252 hp; the Favorit 600 LS sits at the bottom of that range with 85 hp. Its immediate neighbours are the Favorit 610 LS above it with 95 hp. Unladen weight within it ranges from 4,775 to 9,565 kg; here the Favorit 600 LS sits at the bottom of that range with 4,775 kg. 1545 Fendt models across 89 series are on record.

Fendt Favorit (600 LS) – large six-cylinder tractors from Marktoberdorf, models from 600 LS to 626 LS, 62.2 to 185 kW, 4,775 to 9,565 kg unladen weight

The Fendt Favorit 600 LS is a range of large tractors from Marktoberdorf, all with six-cylinder diesel engines; it spans the Favorit 600 LS and 610 LS, through the 611 LS/LSA (FWA282/FWA382), to the 615 LSA and 626 LS (FWA 292). The type numbers order the models by ascending power class. It was a sought-after alternative to imported large tractors for years, in farms with high drawbar demands.

Read on 3 more paragraphs

The register lists 5 versions with 62.2 to 185 kW from six-cylinder engines of 5,652 to 11,407 cm³, unladen weights of 4,775 to 9,565 kg, lengths of 4,684 to 5,660 mm, widths of 2,167 to 2,450 mm, heights of 2,809 to 3,110 mm and torque of 324 to 508 Nm at 2,200 to 2,300 rpm.

The 600 range covered Fendt's upper power segment for large farms, spanning from the more compact 600 LS to the large-displacement 626 LS at the top; it competed with large tractors from other European makers in this market segment. Robust, easy-to-maintain engineering without complex transmission electronics remains one of this range's strengths today.

On a used 600 LS, check the clutch and gearbox, the hydraulic system and lift linkage, and rust on the cab and frame; on the large-displacement, turbocharged six-cylinder engines, check the injection pump and charge-air cooler, with parts available through specialist Fendt parts dealers.

Sources: SpecCodex register, model data: Fendt Favorit (600 LS), Fendt (AGCO, Hersteller)

Technical data

Engine

Fueldieselcorrect
Power85 hp (62.2 kW)correct
Rated speed2,300 rpmcorrect
Torque324 Nmcorrect
Cylinders6correct
Displacement5,652 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,684 mmcorrect
Width2,204 mmcorrect
Height2,809 mmcorrect
Wheelbase2,783 mmcorrect
Ground clearance430 mmcorrect
Unladen weight4,775 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox12/5-Getriebecorrect
Front tyres7.50-20 ( A: 11.2/10-28 )correct
Rear tyres16.9/14-38 ( A: 18.4/15-34 )correct
Top speed30 km/hcorrect

Working data

Fuel tank capacity222 lcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built1,631correct

Other data

Linkage categoryCat IIIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 13 kW/t (62 kW / 4.8 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Favorit 600 LS have?

The Fendt Favorit 600 LS delivers 85 hp.

How much does the Fendt Favorit 600 LS weigh?

The unladen weight is 4,775 kg.

What engine does the Fendt Favorit 600 LS have?

6 cylinders, 5,652 cm³ displacement, Diesel.

How fast does the Fendt Favorit 600 LS go?

Top speed is 30 km/h.

What are the dimensions of the Fendt Favorit 600 LS?

4,684 mm × 2,204 mm × 2,809 mm.

When was the Fendt Favorit 600 LS built?

Production years: 1978–1981.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare