Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Favorit 600 › Favorit 610 SA

Fendt Favorit 610 SA

Built: 1972–1976 · Series: Favorit 600

More machines from model year 1972

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Favorit 610 SA, Fendt offers a model from the Favorit 600 series. Production: 1972–1976. The engine delivers 85 hp (63 kW), has 6 cylinders, with a displacement of 5,100 cm³. Rated speed is 2,300 rpm. The machine is 4,400 mm long, 2,100 mm wide and 2,540 mm high. The unladen weight is 4,260 kg. Top speed is 30 km/h. Transmission: 12V / 6R. The engine is water-cooled. Tyres: front 10-24, rear 13-34. The fuel is diesel. The gearbox offers 12 forward gears. There are also 6 reverse gears. The Favorit 600 series covers 10 models. Rated output within it ranges from 85 to 211 hp; the Favorit 610 SA sits at the bottom of that range with 85 hp. Its immediate neighbours are the Favorit 611 S above it with 105 hp. Unladen weight within it ranges from 3,855 to 9,575 kg; here the Favorit 610 SA sits at the bottom of that range with 4,260 kg. 1545 Fendt models across 89 series are on record.

Fendt Favorit 600 (1976–1993) – the Marktoberdorf large tractors before the Vario: 610 to 615 with MWM five- and six-cylinders, 620 and 622 LS with MAN engines up to 11.4 litres, LS, LSA, Turbomatik, 62 to 155 kW

The Favorit 600 was Fendt's large-tractor range of 1976 to 1993 – the class above the Farmer 300 and the forerunner of the Favorit 800 and 900 Vario. The type logic follows the pattern of the time: the number orders the power step in ascending order – 610 about 85 hp, 612 about 105 hp, 615 about 150 hp, 622 over 200 hp – the letters the equipment: S for the standard version with Turbomatik converter clutch, SA for the same with four-wheel drive, LS for the version with powershift transmission, LSA for powershift with four-wheel drive. The 610 to 615 carry MWM five- and six-cylinders of 5.1 to 6.2 litres from the group tie-up with KHD, the 620 LS and 622 LS by contrast MAN six-cylinders of up to 11.4 litres – the heaviest Fendts of their time, built for contractors and large farms in the north and east.

Read on 3 more paragraphs

The register lists 10 versions with 62.2 to 155 kW (85 to 211 hp), 5,100 to 11,400 cm³ with five or six cylinders, torque from 362 to 828 Nm at 2,400 rpm, unladen weights from 3,855 to 9,575 kg, lengths from 4,382 to 5,700 mm, widths from 2,100 to 2,470 mm and heights from 2,540 to 3,080 mm – all diesel.

The Favorit 600 LSA are regarded as the tractors with which Fendt cemented its premium reputation in the 1980s: Turbomatik, powershift, comfort cab and four-wheel drive in a class where the competition still offered manual gearboxes.

Used Favorit 600s are sought-after classics with stable prices; when buying, engine condition (MWM sixes are regarded as durable), Turbomatik and powershift, front axle on four-wheel-drive models and the cab, whose sheet metal rusts, are what count.

Sources: SpecCodex register, model data: Fendt Favorit 600, Fendt Favorit (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power85 hp (63 kW)correct
Rated speed2,300 rpmcorrect
Cylinders6correct
Displacement5,100 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,400 mmcorrect
Width2,100 mmcorrect
Height2,540 mmcorrect
Unladen weight4,260 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox12V / 6Rcorrect
Forward gears12correct
Reverse gears6correct
Front tyres10-24correct
Rear tyres13-34correct
Top speed30 km/hcorrect

Where this model stands

Power-to-weight ratio: 14.8 kW/t (63 kW / 4.3 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Favorit 610 SA have?

The Fendt Favorit 610 SA delivers 85 hp.

How much does the Fendt Favorit 610 SA weigh?

The unladen weight is 4,260 kg.

What engine does the Fendt Favorit 610 SA have?

6 cylinders, 5,100 cm³ displacement, Diesel.

How fast does the Fendt Favorit 610 SA go?

Top speed is 30 km/h.

What are the dimensions of the Fendt Favorit 610 SA?

4,400 mm × 2,100 mm × 2,540 mm.

When was the Fendt Favorit 610 SA built?

Production years: 1972–1976.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare