Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › 700 Vario Gen7.1 › 726 Vario

Fendt 726 Vario Gen7.1

Built: 2022–2026 · Series: 700 Vario Gen7.1

More machines from model year 2022

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 726 Vario Gen7.1 from Fendt is part of the 700 Vario Gen7.1 series. Production: 2022–2026. The engine delivers 262 hp (193 kW), has 6 cylinders, with a displacement of 7,527 cm³. The machine is 5,120 mm long and 2,994 mm wide. The wheelbase measures 2,900 mm. Transmission: Vario TA190. The gross vehicle weight is 14,000 kg. The 700 Vario Gen7.1 series covers 5 models and was built 2022–2026. Rated output within it ranges from 203 to 283 hp; the 726 Vario sits in the upper part of that range with 262 hp. Its immediate neighbours are the 724 Vario below it with 243 hp and the 728 Vario above it with 283 hp. 1545 Fendt models across 89 series are on record.

Fendt 700 Vario Gen7.1 720 to 728 – the updated mid-range: a 7.53-litre six-cylinder, stepless Vario transmission, 193 to 223 kW, 8.8 to 9.65 t

The 700 Vario range forms Fendt's mid-range between the compact 300s and the large 900s; the 7.1 generation is a revision of the seventh generation, sharpened chiefly in cab, driver-assistance and exhaust after-treatment over the original version 7. On the 720 to 728 Vario models the number orders the power class in ascending order, all carrying the same six-cylinder of 7,527 cm³, whose output is stepped electronically by model – a principle by which Fendt covers several power classes from one engine size instead of fitting a separate engine for each step. The stepless Vario transmission transmits power without gear steps or interruption of tractive force.

Read on 3 more paragraphs

The register lists 5 versions with power recorded from 193 to 223 kW from six-cylinders of a constant 7,527 cm³, operating weights from 8,800 to 9,650 kg at a gross weight of 14,000 kg, linkage lift capacity up to 11,050 kg and a length of 5,120 mm at widths of 2,750 to 2,994 mm.

The 700 Vario is the classic mid-range field tractor for mixed farms and contractors switching between pulling power for heavy tillage and road travel for harvest work.

On used tractors, the condition of the Vario transmission and engine management, leak-free hydraulics, rust on cab and bonnet, the condition of front-axle suspension and tyres and parts supply through the Fendt dealer network are what count.

Sources: SpecCodex register, model data: Fendt 700 Vario Gen7.1, Fendt (AGCO, Hersteller)

Technical data

Engine

EngineAGCO Power CORE75, 6 cyl.correct
Power262 hp (193 kW)correct
Maximum torque1,384 N·mcorrect
Cylinders6correct
Displacement7,527 cm³correct
Exhaust aftertreatmentDOC + DPF + SCRcorrect

Dimensions and weights

Length5,120 mmcorrect
Width2,994 mmcorrect
Wheelbase2,900 mmcorrect
Unladen weight9200–9650 kgcorrect
Gross vehicle weight14,000 kgcorrect

Drivetrain and chassis

GearboxVario TA190correct
Top speed50/60 km/hcorrect

Working data

Fuel tank capacity450 lcorrect
Hydraulic flow165 l/mincorrect

Other data

AdBlue tank48 lcorrect
Front linkage lift capacity5,300 daNcorrect
Rear linkage lift capacity11,050 daNcorrect

Where this model stands

Power-to-weight ratio: 21 kW/t (193 kW / 9.2 t)

Power class: Heavy (> 180 hp)

Stronger than 96% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 726 Vario have?

The Fendt 726 Vario delivers 262 hp.

What is the gross vehicle weight of the Fendt 726 Vario?

14,000 kg.

What engine does the Fendt 726 Vario have?

6 cylinders, 7,527 cm³ displacement.

What are the dimensions of the Fendt 726 Vario?

5,120 mm × 2,994 mm.

When was the Fendt 726 Vario built?

Production years: 2022–2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Fendt 726 Vario on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: api.fendt.com (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare