Fendt 207 S
Built: 2003 · Series: 200 S-Reihe
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt 200 S-range – the compact 207 S and 209 S from Marktoberdorf: Vario transmission, three- or four-cylinder engine, 51 to 65.9 kW
The Fendt 200 S range, like the brand's other Vario tractors, is built in Marktoberdorf in Upper Bavaria. The 207 S and 209 S show the type logic of the 200 range: the first two digits denote the range, the last digit the power step within it. Both models are approved for running on diesel or RME. As with all Fendt Vario ranges, the stepless transmission allows travel speed to be matched to the task independent of load and engine speed.
Read on 3 more paragraphs
The register lists here 2 versions with 51 to 65.9 kW (70 to 90 hp) from three- to four-cylinder engines of 3,236 to 4,314 cm³ displacement and 264 to 327 Nm of torque, with unladen weights from 3,130 to 3,220 kg, lengths from 3,565 to 3,695 mm, widths from 1,925 to 1,963 mm and a height of 2,515 mm.
The 200 range forms the compact entry segment in Fendt's Vario line-up, aimed at smaller and medium-sized farms as well as municipal and special applications, where manoeuvrability and lower weight matter more than on the brand's larger standard tractors. In municipal use, tractors of this size class are often fitted with a sweeper, snow plough or mower arm.
When buying used, check the condition and service history of the stepless Vario transmission, the tightness of the hydraulics, the condition of the electronics, and the operating hours and rust on the chassis and cab. Spares and service run through Fendt's distribution within AGCO.
Sources: SpecCodex register, model data: Fendt 200 S-Reihe, Fendt (AGCO, Hersteller)
Technical data
Engine
| Fuel | Diesel/RMEcorrect |
|---|---|
| Power | 70 hp (51 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 264 Nmcorrect |
| Speed at max. torque | 1,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,236 cm³correct |
| Bore | 102 mmcorrect |
| Stroke | 132 mmcorrect |
| Injection pressure | 1,000 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,565 mmcorrect |
|---|---|
| Width | 1,925 mmcorrect |
| Height | 2,515 mmcorrect |
| Wheelbase | 2,102 mmcorrect |
| Ground clearance | 395 mmcorrect |
| Unladen weight | 3,130 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 21V/6Rcorrect |
| Front tyres | 335/80 R 18correct |
| Rear tyres | 16.9 R 28correct |
| Top speed | 40 km/hcorrect |
Working data
| Fuel tank capacity | 71 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| PTO speed | 540/750/1000 rpmcorrect |
|---|
Where this model stands
Power-to-weight ratio: 16.3 kW/t (51 kW / 3.1 t)
Power class: Universal (40–100 hp)
Stronger than 47% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 207 S have?
The Fendt 207 S delivers 70 hp.
How much does the Fendt 207 S weigh?
The unladen weight is 3,130 kg.
What engine does the Fendt 207 S have?
3 cylinders, 3,236 cm³ displacement, Diesel/RME.
How fast does the Fendt 207 S go?
Top speed is 40 km/h.
What are the dimensions of the Fendt 207 S?
3,565 mm × 1,925 mm × 2,515 mm.
When was the Fendt 207 S built?
Production years: 2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.